PART#: BX-13
Reference Part#: BW-HT-16
|
description Turbine Hub |
Specifications - Outer Dia: 3.66"
- Internal Teeth: 22
|
Application
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
|
|
description Turbine Hub |
Specifications - Height: .720"
- Outer Dia: 3.660"
- Internal Teeth: 21
|
Application
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
-
Industrial Borg Warner, 9-1/2" Industrial
|
PART#: BX-13-2
Reference Part#: BW-HT-17
|
description Turbine Hub |
Specifications - Outer Dia: 3.66"
- Internal Teeth: 23
|
Application
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.66"
- Internal Teeth: 23
- Hardness: Heat Treated
|
Application
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
|
PART#: BX-13-3
Reference Part#: BW-HT-18
|
description Turbine Hub |
Specifications - Height: 0.72"
- Outer Dia: 3.66"
- Internal Teeth: 24
|
Application
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
-
Industrial Borg Warner, 9-1/2" Industrial
|
|
description Turbine Hub |
Specifications - Height: 0.72"
- Outer Dia: 3.66"
- Internal Teeth: 24
- Hardness: Heat Treated
|
Application
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
-
Industrial Borg Warner, 9-1/2" Industrial
|
PART#: BX-13-4
Reference Part#: BW-HT-14
|
description Turbine Hub |
Specifications - Outer Dia: 3.66"
- Internal Teeth: 26
|
Application
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
|
PART#: BX-13HT
Reference Part#: BW-HT-16HS
|
description Turbine Hub |
Specifications - Outer Dia: 3.66"
- Internal Teeth: 22
- Hardness: Heat Treated
|
Application
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
|
PART#: CX-13
Reference Part#: CV-HT-2, 3702724
|
description Turbine Hub,(use WX-12A rivets) |
Specifications |
Application
-
General Motors Powerglide
-
High Performance Chevrolet (HP)
|
PART#: CX-13-1
Reference Part#: CV-HT
|
description Turbine Hub |
Specifications |
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
High Performance Chevrolet (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 17 (POWERGLIDE)
- Material: STEEL
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Outer Dia: 4"
- Internal Teeth: 30
- Hardness: Heat Treated
|
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
High Performance Chevrolet (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30 (TH350)
- Material: STEEL
|
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
High Performance Chevrolet (HP)
|
|
description Component,(For CX-13-1SMK) |
Specifications |
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
High Performance Chevrolet (HP)
|
|
description Turbine Hub Kit |
Specifications |
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
High Performance Chevrolet (HP)
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.65"
- Internal Teeth: 22
|
Application
-
General Motors TH180 (TH-180 Strasbourg, Tri-matic, GM-3, Corvair, Tempest)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 24 (CHRYSLER)
- Material: STEEL
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 26 (FORD)
- Material: STEEL
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27 (GM)
- Material: STEEL
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27 (CHRYSLER)
- Material: STEEL
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.65"
- Internal Teeth: 22
- Hardness: Heat Treated
|
Application
-
General Motors TH180 (TH-180 Strasbourg, Tri-matic, GM-3, Corvair, Tempest)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30 (GM)
- Material: STEEL
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 31 (FORD)
- Material: STEEL
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications |
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
High Performance Chevrolet (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30
- Hardness: Heat Treated
- Material: Steel
|
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
High Performance Chevrolet (HP)
|
PART#: CX-13HT
Reference Part#: CV-HT-2HS
|
description Turbine Hub |
Specifications |
Application
-
General Motors Powerglide
-
High Performance Chevrolet (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 17 (Powerglide)
- Material: STEEL
|
Application
-
General Motors Powerglide
-
High Performance Chevrolet (HP)
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.82"
- Internal Teeth: 31
|
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
|
PART#: FX-13-1
Reference Part#: FD-HT-4E
|
description Turbine Hub,With Chamfer |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 24
|
Application
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
-
Ford 2 Speed
-
Ford C4
|
PART#: FX-13-10
Reference Part#: FD-HT-AOD
|
description Turbine Hub |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 35
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 35
- Hardness: Heat Treated
|
Application
|
|
description Turbine Hub |
Specifications - Internal Teeth: 48
- For Split Torque Planetary
|
Application
-
Ford ATX Lockup & Non-Lockup
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 26
- External teeth: 36
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 26
- External teeth: 36
- Hardness: Heat Treated
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 21
- External teeth: 40
|
Application
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 21
- External teeth: 40
- Hardness: Heat Treated
|
Application
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
|
PART#: FX-13-14
Reference Part#: FD-HT-AXOD
|
description Turbine Hub |
Specifications - Outer Dia: 3.8"
- Internal Teeth: 23
- External teeth: 44
|
Application
|
PART#: FX-13-15
Reference Part#: FD-HT-65
|
description Turbine Hub |
Specifications - Outer Dia: 4.3"
- Internal Teeth: 44
- For CLC With Brake Shoes
|
Application
-
Ford ATX Lockup & Non-Lockup
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.3"
- Internal Teeth: 44
- Hardness: Heat Treated
|
Application
-
Ford ATX Lockup & Non-Lockup
|
PART#: FX-13-16
Reference Part#: FD-HT-30
|
description Turbine Hub,"Open" (Non-Lockup) |
Specifications - Outer Dia: 3.8"
- Internal Teeth: 30
|
Application
-
Ford ATX Lockup & Non-Lockup
|
|
description Sleeve,Turbine, Triple Spline |
Specifications |
Application
-
Ford ATX Lockup & Non-Lockup
|
|
description Insert,Planetary Repair |
Specifications - Height: 0.97"
- Outer Dia: 1.15"
- Internal Teeth: 24
|
Application
-
Ford ATX Lockup & Non-Lockup
|
PART#: FX-13-19
Reference Part#: FD-HT-E4OD
|
description Turbine Hub |
Specifications - Outer Dia: 3.88"
- Internal Teeth: 31
- External teeth: 68
|
Application
|
|
description Turbine Hub,Bearing Type |
Specifications - Outer Dia: 3.88"
- Internal Teeth: 31
- External teeth: 68
- Use 35402B or 65405 (8628202)
|
Application
|
|
description Turbine Hub,Kit, Bearing Type |
Specifications - Outer Dia: 3.88"
- Internal Teeth: 31
- External teeth: 68
- Includes Bearing 35402B
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.88"
- Internal Teeth: 31
- External teeth: 68
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.88"
- Internal Teeth: 31
- External teeth: 68
- Hardness: Heat Treated
|
Application
|
|
description Turbine Hub Kit |
Specifications |
Application
|
|
description Turbine Hub Kit |
Specifications |
Application
|
|
description Turbine Hub |
Specifications |
Application
|
|
description Turbine Hub,E4OD |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.88"
- Internal Teeth: 31
- External teeth: 68
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.88"
- Internal Teeth: 31
- External teeth: 68
- Hardness: Heat Treated
- Adaptable To Bronze Washers FW-9-15A/F
|
Application
|
|
description Turbine Hub,With Chamfer |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 24
- Material: Solid Steel
|
Application
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
-
Ford 2 Speed
-
Ford C4
|
PART#: FX-13-2
Reference Part#: FD-HT-6
|
description Turbine Hub |
Specifications - Outer Dia: 3.88"
- Internal Teeth: 31
|
Application
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
PART#: FX-13-20
Reference Part#: FD-HT-AODE
|
description Turbine Hub |
Specifications - Outer Dia: 3.88"
- Internal Teeth: 31
- External teeth: 54
|
Application
|
|
description Turbine Hub |
Specifications |
Application
|
PART#: FX-13-21
Reference Part#: FD-HT-16
|
description Turbine Hub |
Specifications - Outer Dia: 3.38"
- Internal Teeth: 30
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.38"
- Internal Teeth: 30
- Hardness: Heat Treated
- Uses 10 rivets
|
Application
|
PART#: FX-13-22
Reference Part#: FD-HT-34
|
description Turbine Hub |
Specifications - Outer Dia: 3.38"
- Internal Teeth: 30
- External teeth: 54
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.38"
- Internal Teeth: 30
- External teeth: 54
- Hardness: Heat Treated
|
Application
|
|
description Turbine Hub Spline Adapter,Fits 2-Speed Ford, Converts To C-4 (45° Pressure Angle) |
Specifications - Height: 1.1"
- Outer Dia: 1.06"
- Internal Teeth: 24
- External teeth: 31
|
Application
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
-
Ford 2 Speed
-
Ford C4
|
PART#: FX-13-26
Reference Part#: FD-I-26
|
description Turbine Hub Spline Adapter,Fits 2-Speed Ford, Converts To C-6 (45° Pressure Angle) |
Specifications - Height: 1.1"
- Outer Dia: 1.06"
- Internal Teeth: 26
- External teeth: 31
|
Application
|
|
description Turbine Hub Spline Adapter,Fits C-6 Turbine Hubs, Converts To C-4, (30° Pressure Angle) |
Specifications - Height: 0.91"
- Outer Dia: 1"
- Internal Teeth: 26
- External teeth: 31
|
Application
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
-
Ford C6
-
Ford C4
|
|
description Turbine Hub Spline Adapter,Fits C-4 (30° Pressure Angle) |
Specifications - Height: 0.83"
- Outer Dia: 1"
- Internal Teeth: 26
- External teeth: 31
|
Application
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27
- Material: STEEL
|
Application
-
High Performance Ford To GM (HP)
|
|
description Insert Kit |
Specifications - Weld-In Kit, Eliminates Planetary Gear Set, With Instructions.
|
Application
-
Ford ATX Lockup & Non-Lockup
-
Ford ATX
|
PART#: FX-13-2S
Reference Part#: FD-HT-6HS
|
description Turbine Hub |
Specifications - Outer Dia: 3.88"
- Internal Teeth: 31
- Material: Solid Steel
|
Application
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
|
description Turbine Hub,High Type |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 29
- FMX, C5TP-7926B
|
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
|
PART#: FX-13-30
Reference Part#: FD-HT-3
|
description Turbine Hub |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 21
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 21
- Hardness: Heat Treated
|
Application
|
PART#: FX-13-31
Reference Part#: FD-HT-12
|
description Turbine Hub |
Specifications - Outer Dia: 3.8"
- Internal Teeth: 25
- External teeth: 44
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.8"
- Internal Teeth: 25
- External teeth: 44
- Hardness: Heat Treated
|
Application
|
|
description Turbine Hub |
Specifications |
Application
|
|
description Turbine Hub |
Specifications - Internal Teeth: 25
- Hardness: Heat Treated
|
Application
|
PART#: FX-13-33
Reference Part#: FD-HT-25
|
description Turbine Hub,Weld-In |
Specifications - Outer Dia: 3.5"
- Internal Teeth: 21
|
Application
-
Ford A4LD, 4R55E
-
Ford A4LD, 4R55E, Late
-
Ford A4LD Multi-Clutch 4.0
|
|
description Turbine Hub,Weld-In |
Specifications - Outer Dia: 3.5"
- Internal Teeth: 21
- External teeth: 40
- Hardness: Heat Treated
|
Application
-
Ford A4LD, 4R55E
-
Ford A4LD, 4R55E, Late
-
Ford A4LD Multi-Clutch 4.0
|
|
description Turbine Hub |
Specifications |
Application
-
Ford A4LD, 4R55E
-
Ford A4LD, 4R55E, Late
-
Ford A4LD Multi-Clutch 4.0
|
PART#: FX-13-34
Reference Part#: FD-HT-31
|
description Turbine Hub,With Seal Groove |
Specifications - Outer Dia: 4.05"
- Internal Teeth: 31
- External teeth: 68
|
Application
-
Ford 4R100 4 Speed, RWD / 4 × 4
-
Ford 5R110W
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.05"
- Internal Teeth: 31
- External teeth: 68
- Used with 35402B bearing
|
Application
-
Ford 4R100 4 Speed, RWD / 4 × 4
-
Ford 5R110W
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.05"
- Internal Teeth: 31
- External teeth: 68
|
Application
-
Ford 4R100 4 Speed, RWD / 4 × 4
-
Ford 5R110W
|
PART#: FX-13-35
Reference Part#: FD-HT-33
|
description Turbine Hub,Without Seal Groove |
Specifications - Outer Dia: 4.05"
- Internal Teeth: 31
- External teeth: 68
|
Application
-
Ford 4R100 4 Speed, RWD / 4 × 4
-
Ford 5R110W
|
|
description Turbine Hub,Without Seal Groove |
Specifications - Outer Dia: 4.05"
- Internal Teeth: 31
- External teeth: 68
- Hardness: Heat Treated
|
Application
-
Ford 4R100 4 Speed, RWD / 4 × 4
-
Ford 5R110W
|
|
description Turbine Hub,With Lube Holes, 4R100 E4OD |
Specifications |
Application
-
Ford 4R100 4 Speed, RWD / 4 × 4
-
Ford 5R110W
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.48"
- Internal Teeth: 16
- Hardness: Heat Treated
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.05"
- Internal Teeth: 31
- External teeth: 68
- Hardness: Heat Treated
- To Convert to Single Plate Clutch and to be Used with Clutches (FX-23-11N, FX-23-43) and O-Ring (FO-25-5)
|
Application
-
Ford 4R100 4 Speed, RWD / 4 × 4
-
Ford 5R110W
|
|
description Turbine Hub,3L8P-7926-AA |
Specifications - Outer Dia: 3.38"
- Internal Teeth: 30
- Hardness: Heat Treated
|
Application
-
Ford CD4E 9-1/4" (3.0L & 2.3L)
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.38"
- Internal Teeth: 30
- 3L8P-7926-AA
|
Application
-
Ford CD4E 9-1/4" (3.0L & 2.3L)
|
PART#: FX-13-3S
Reference Part#: FD-HT-27
|
description Turbine Hub,High Type |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 29
- FMX, C5TP-7926B
|
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 26
|
Application
-
Ford C-5
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
|
description Turbine Hub |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub,10" 245mm, 26 Spline, C-4 |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub,10" 245mm C-6 Spline |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications |
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.80"
- Internal Teeth: 21 (6 Removed)
- Hardness: Heat Treated
|
Application
|
|
description Turbine Hub |
Specifications |
Application
|
|
description Turbine Hub Conversion Kit |
Specifications - Adapts Ford C5, C6, AOD and E4OD turbine to 4R100 multi-plate clutch-assembly.
|
Application
|
|
description Turbine Hub |
Specifications |
Application
-
Ford CD4E 9-1/4" (3.0L & 2.3L)
|
|
description Turbine Hub |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications |
Application
|
|
description Turbine Hub |
Specifications |
Application
-
Ford C-5
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
PART#: FX-13-4S
Reference Part#: FD-HT-4
|
description Turbine Hub |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 26
- Material: Solid Steel
|
Application
-
Ford C-5
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
PART#: FX-13-6
Reference Part#: FD-HT-4T
|
description Turbine Hub |
Specifications - Outer Dia: 3.85"
- Internal Teeth: 26
|
Application
-
Ford C-5
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
PART#: FX-13-7
Reference Part#: BW-HT-6
|
description Turbine Hub |
Specifications - Height: 1.45"
- Outer Dia: 3.8"
- Internal Teeth: 29
- Low Type, With Shoulder
|
Application
-
Borg Warner Bolted Aluminum, Industrial & Ford Passenger Applications
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
|
PART#: FX-13-8
Reference Part#: BW-HT-2
|
description Turbine Hub |
Specifications - Height: 1.45"
- Outer Dia: 3.8"
- Internal Teeth: 17
- C2AP-7926C, PAZ-7926B
|
Application
-
Borg Warner Bolted Aluminum, Industrial & Ford Passenger Applications
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
|
|
description Turbine Hub |
Specifications |
Application
-
Borg Warner Bolted Aluminum, Industrial & Ford Passenger Applications
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
|
|
description Turbine Hub |
Specifications |
Application
-
Ford C-4, 10-1/4", 2 Speed
|
|
description Turbine Hub |
Specifications - Internal Teeth: 24
- Material: STEEL
|
Application
-
Ford C-4, 10-1/4", 2 Speed
-
High Performance Ford To Chrysler (HP)
|
PART#: FX-13GM
Reference Part#: FDGM-HT-HP
|
description Turbine Hub |
Specifications - Internal Teeth: 30
- Material: STEEL
|
Application
-
Ford C-4, 10-1/4", 2 Speed
-
High Performance Ford To GM (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30
- Material: STEEL
- WELD TYPE
|
Application
-
Ford C-4, 10-1/4", 2 Speed
-
High Performance Ford To GM (HP)
|
PART#: FX-13GMHT
Reference Part#: FDGM-HT-HPHS
|
description Turbine Hub |
Specifications - Internal Teeth: 30
- Hardness: Heat Treated
|
Application
-
Ford C-4, 10-1/4", 2 Speed
-
High Performance Ford To GM (HP)
|
|
description Turbine Hub |
Specifications |
Application
-
Subaru Lockup And Non-Lockup (Antique), Smooth Impeller (SU-2...),Ribbed Impeller (SU-1), Centrifugal Clutch (SU-4/5/7/8)
-
Jatco, Nissan & Other Japanese Datsun/Mazda 8-7/8" (225mm) Dia., 9-3/8 (238mm Hollow/Solid Pilot)
|
|
description Turbine Hub |
Specifications |
Application
-
Jatco, Nissan & Other Japanese F3A FWD, DA-7
-
Jatco, Nissan & Other Japanese Datsun/Mazda 8-7/8" (225mm) Dia., 9-3/8 (238mm Hollow/Solid Pilot)
|
PART#: JX-13-10
Reference Part#: NI-HT-2
|
description Turbine Hub |
Specifications - Outer Dia: 3.72"
- Inner Dia: 1.94"
- Internal Teeth: 20
- External teeth: 46
|
Application
-
Jatco, Nissan & Other Japanese RE4R01A, DA-18, DA-48
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.72"
- Inner Dia: 1.94"
- Internal Teeth: 20
- External teeth: 46
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese RE4R01A, DA-18, DA-48
|
PART#: JX-13-11
Reference Part#: MZ-HT-9
|
description Turbine Hub |
Specifications - Outer Dia: 4.09"
- Internal Teeth: 25
|
Application
-
Mazda G4A, Ford 4EAT, DA-15,15L/S
|
|
description Turbine Hub,Mazda/Probe |
Specifications |
Application
|
|
description Turbine Hub |
Specifications - Internal Teeth: 21
- Hardness: Heat Treated
|
Application
|
PART#: JX-13-13
Reference Part#: MZ-HT-1
|
description Turbine Hub |
Specifications - Outer Dia: 3.86"
- Internal Teeth: 21
- Use With JW-3 Bronze Washer
|
Application
-
Mazda G4A, Ford 4EAT, DA-24
-
Subaru 4EAT
|
|
description Turbine Hub |
Specifications |
Application
-
Mazda G4A, Ford 4EAT, DA-24
-
Subaru 4EAT
|
PART#: JX-13-14
Reference Part#: NI-HT-1
|
description Turbine Hub |
Specifications - Outer Dia: 3.72"
- Inner Dia: 1.875"
- Internal Teeth: 20
- External teeth: 46
|
Application
-
Jatco, Nissan & Other Japanese RL4F02A, DA-11
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.72"
- Inner Dia: 1.75"
- Internal Teeth: 20
- External teeth: 46
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese RL4F02A, DA-11
|
PART#: JX-13-15
Reference Part#: NI-HT-3
|
description Turbine Hub |
Specifications - Outer Dia: 3.72"
- Internal Teeth: 18
- External teeth: 46
|
Application
-
Jatco, Nissan & Other Japanese Nissan Micra, DA-35
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.72"
- Internal Teeth: 18
- External teeth: 46
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese Nissan Micra, DA-35
|
PART#: JX-13-16
Reference Part#: SU-HT-1
|
description Turbine Hub |
Specifications - Outer Dia: 3.72"
- Internal Teeth: 22
- External teeth: 46
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.72"
- Internal Teeth: 22
- External teeth: 46
- Hardness: Heat Treated
|
Application
|
PART#: JX-13-17
Reference Part#: MZ-HT-2
|
description Turbine Hub |
Specifications - Outer Dia: 4.11"
- Internal Teeth: 25
- External teeth: 40
|
Application
-
Mazda G4A, Ford 4EAT, DA-15,15L/S
-
Mazda 4EAT-G
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.11"
- Internal Teeth: 25
- External teeth: 40
- Hardness: Heat Treated
|
Application
-
Mazda G4A, Ford 4EAT, DA-15,15L/S
-
Mazda 4EAT-G
|
|
description Spline Insert,Pump Drive |
Specifications - Height: 1"
- External teeth: 18
|
Application
-
High Performance Jatco-Mazda-Subaru-Nissan (HP)
|
|
description Spline Insert,Pump Drive |
Specifications - Height: 1.25"
- External teeth: 18
|
Application
-
High Performance Jatco-Mazda-Subaru-Nissan (HP)
|
|
description Insert,Industrial |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Spline Insert,Pump Drive |
Specifications - Height: 0.88"
- External teeth: 18
|
Application
-
Jatco, Nissan & Other Japanese RN3F01A, DA-10
-
Jatco, Nissan & Other Japanese F3A, DA-12-TT
-
Jatco, Nissan & Other Japanese RL3F01A, DA-6; RL4F02A, DA-13
-
Jatco, Nissan & Other Japanese L3N71B, DA-5
-
Jatco, Nissan & Other Japanese RL4F03A, DA-28
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.31"
- Internal Teeth: 18
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese F3A FWD, DA-7
-
Jatco, Nissan & Other Japanese Datsun/Mazda 8-7/8" (225mm) Dia., 9-3/8 (238mm Hollow/Solid Pilot)
|
|
description Turbine Hub |
Specifications |
Application
-
Jatco, Nissan & Other Japanese Datsun/Mazda 8-7/8" (225mm) Dia., 9-3/8 (238mm Hollow/Solid Pilot)
|
|
description Spline Insert,Pump Drive |
Specifications - Height: 1.25"
- External teeth: 20
|
Application
-
Jatco, Nissan & Other Japanese RL4F02A, DA-11
-
High Performance Jatco-Mazda-Subaru-Nissan (HP)
|
|
description Spline Insert,Pump Drive |
Specifications - Height: 0.75"
- External teeth: 20
|
Application
-
High Performance Jatco-Mazda-Subaru-Nissan (HP)
|
|
description Spline Insert,Pump Drive |
Specifications - Height: 1.14"
- External teeth: 21
|
Application
-
Mazda G4A, Ford 4EAT, DA-16
-
Mazda G4A-HL, DA-17
-
Mazda G4A, Ford 4EAT, DA-24
-
High Performance Jatco-Mazda-Subaru-Nissan (HP)
|
|
description Insert |
Specifications - Height: 1.21"
- Outer Dia: 1.22"
- Internal Teeth: 20
|
Application
|
|
description Insert |
Specifications - Height: 1.21"
- Outer Dia: 1.22"
- Internal Teeth: 20
- Hardness: Heat Treated
|
Application
|
|
description Spline Insert,Pump Drive |
Specifications - Height: 1.08"
- External teeth: 25
|
Application
-
Mazda G4A, Ford 4EAT, DA-15,15L/S
-
High Performance Jatco-Mazda-Subaru-Nissan (HP)
|
PART#: JX-13-26
Reference Part#: NI-HT-4
|
description Turbine Hub |
Specifications - Outer Dia: 3.72"
- Internal Teeth: 24
- External teeth: 46
|
Application
-
Jatco, Nissan & Other Japanese RG4R01A, DA-25
-
Jatco, Nissan & Other Japanese RE4R03A, DA-30, 280mm
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.72"
- Internal Teeth: 24
- External teeth: 46
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese RG4R01A, DA-25
-
Jatco, Nissan & Other Japanese RE4R03A, DA-30, 280mm
|
PART#: JX-13-27
Reference Part#: JA-HT-1
|
description Turbine Hub |
Specifications - Outer Dia: 3.72"
- Internal Teeth: 24
- External teeth: 46
|
Application
-
Jatco, Nissan & Other Japanese RE4R03A, DA-31, 250mm
|
|
description Turbine Hub |
Specifications |
Application
-
Jatco, Nissan & Other Japanese RE4R03A, DA-31, 250mm
|
PART#: JX-13-28
Reference Part#: JA-HT-8-20
|
description Turbine Hub |
Specifications - Outer Dia: 3.46"
- Internal Teeth: 20
- External teeth: 46
|
Application
-
Jatco, Nissan & Other Japanese R4A-EL, DA-8-20
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.46"
- Internal Teeth: 20
- External teeth: 46
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese R4A-EL, DA-8-20
|
PART#: JX-13-29
Reference Part#: MZ-HT-6
|
description Turbine Hub |
Specifications - Outer Dia: 4.09"
- Internal Teeth: 24
- Snap Ring Included
|
Application
-
Mazda G4A, Ford 4EAT, DA-16
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.09"
- Internal Teeth: 24
- Hardness: Heat Treated
- Snap Ring Included
|
Application
-
Mazda G4A, Ford 4EAT, DA-16
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.54"
- Internal Teeth: 18
|
Application
-
Ford Jatco, Granada & Monarch '77-Up
|
PART#: JX-13-30
Reference Part#: MZ-HT-5
|
description Turbine Hub |
Specifications - Outer Dia: 4.4"
- Internal Teeth: 18
- External teeth: 54
|
Application
-
Jatco, Nissan & Other Japanese RL4F03A, DA-28
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.4"
- Internal Teeth: 18
- External teeth: 54
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese RL4F03A, DA-28
|
PART#: JX-13-31
Reference Part#: JA-HT-20
|
description Turbine Hub |
Specifications - Outer Dia: 3.7"
- Internal Teeth: 18
|
Application
-
Jatco, Nissan & Other Japanese JF403, DA-20
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.7"
- Internal Teeth: 18
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese JF403, DA-20
|
PART#: JX-13-32
Reference Part#: MZ-HT-7
|
description Turbine Hub,Snap Ring Installed |
Specifications - Outer Dia: 3.52"
- Internal Teeth: 21
|
Application
-
Mazda G4A-EL, Late, DA-29, DA-34
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.52"
- Internal Teeth: 21
- Hardness: Heat Treated
- Snap Ring included
|
Application
-
Mazda G4A-EL, Late, DA-29, DA-34
|
PART#: JX-13-33
Reference Part#: MZ-HT-8
|
description Turbine Hub |
Specifications - Outer Dia: 3.52"
- Internal Teeth: 21
- Snap Ring Installed
|
Application
-
Mazda G4A-EL, Late, DA-29, DA-34
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.52"
- Internal Teeth: 21
- Hardness: Heat Treated
- Snap Ring Installed
|
Application
-
Mazda G4A-EL, Late, DA-29, DA-34
|
PART#: JX-13-34
Reference Part#: JA-HT-10
|
description Turbine Hub |
Specifications - Outer Dia: 3.94"
- Internal Teeth: 18
|
Application
-
Jatco, Nissan & Other Japanese RN3F01A, DA-10
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.94"
- Internal Teeth: 18
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese RN3F01A, DA-10
|
PART#: JX-13-35
Reference Part#: JA-HT-25
|
description Turbine Hub |
Specifications - Outer Dia: 3.72"
- Internal Teeth: 24
- External teeth: 46
|
Application
-
Jatco, Nissan & Other Japanese RG4R01A, DA-25
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.72"
- Internal Teeth: 24
- External teeth: 46
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese RG4R01A, DA-25
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.86"
- Internal Teeth: 21
- Hardness: Heat Treated
- (Modified For JW-4-20 Bearing Adapter)
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.66"
- Internal Teeth: 18
|
Application
-
Jatco, Nissan & Other Japanese DA-22, DA-23
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.66"
- Internal Teeth: 18
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese DA-22, DA-23
|
|
description Turbine Hub |
Specifications - Height: 1.29"
- Outer Dia: 3.84"
- Internal Teeth: 18
- External teeth: 48
- Hardness: Heat Treated
- 12 rivet holes
|
Application
-
Jatco, Nissan & Other Japanese DA-38
|
|
description Turbine Hub,Swift |
Specifications |
Application
-
Jatco, Nissan & Other Japanese GM Suzuki Swift
|
|
description Turbine Hub |
Specifications - Height: .95"
- Outer Dia: 3.70"
- Internal Teeth: 18
- Hardness: Heat Treated
-
6 Rivet Holes
|
Application
-
Jatco, Nissan & Other Japanese GM Suzuki Swift
|
|
description Turbine Hub |
Specifications |
Application
-
Jatco, Nissan & Other Japanese DA-43
|
|
description Turbine Hub |
Specifications - Height: .87"
- Outer Dia: 3.61"
- Internal Teeth: 18
- Hardness: Heat Treated
- 6 Rivet Holes
|
Application
-
Jatco, Nissan & Other Japanese DA-43
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.86"
- Internal Teeth: 21
- Uses Seal Ring
|
Application
-
Mazda G4A, Ford 4EAT, DA-24
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.86"
- Internal Teeth: 21
- Hardness: Heat Treated
- Uses Seal Ring
|
Application
-
Mazda G4A, Ford 4EAT, DA-24
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.09"
- Internal Teeth: 21
|
Application
-
Mazda G4A, Ford 4EAT, DA-16
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.09"
- Internal Teeth: 21
- Hardness: Heat Treated
|
Application
-
Mazda G4A, Ford 4EAT, DA-16
|
|
description Turbine Hub Kit |
Specifications - Outer Dia: 4.09"
- Internal Teeth: 21
- Contains JW-4-28, 35400C, JX-13-42HT
|
Application
-
Mazda G4A, Ford 4EAT, DA-16
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.86"
- Internal Teeth: 21
|
Application
-
Mazda G4A, Ford 4EAT, DA-24
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.86"
- Internal Teeth: 21
- Hardness: Heat Treated
- 21 Spline, Use With TW-2-4 Bearing & JW-9-14Turbine Washer
|
Application
-
Mazda G4A, Ford 4EAT, DA-24
|
|
description Turbine Hub |
Specifications |
Application
-
Jatco, Nissan & Other Japanese Nissan Silvia
|
|
description Turbine Hub |
Specifications - Height: 1.04"
- Outer Dia: 3.80"
- Internal Teeth: 18
- Hardness: Heat Treated
- 6 Rivet Hole
|
Application
-
Jatco, Nissan & Other Japanese Nissan Silvia
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.86"
- Internal Teeth: 21
- Uses Seal-Ring
|
Application
-
Mazda G4A, Ford 4EAT, DA-24
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.86"
- Internal Teeth: 21
- Hardness: Heat Treated
- Uses Seal-Ring
|
Application
-
Mazda G4A, Ford 4EAT, DA-24
|
|
description Turbine Hub |
Specifications - Height: 1.15"
- Outer Dia: 3.86
- Internal Teeth: 20
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese RE4F04 A/V, DA-39
-
Jatco, Nissan & Other Japanese DA-39, DA-42
|
|
description Turbine Hub |
Specifications - Height: 1.18"
- Outer Dia: 4.17"
- Internal Teeth: 18
- Hardness: Heat Treated
- 12 Rivet Hole
|
Application
-
Jatco, Nissan & Other Japanese Daikin Industrial
|
|
description Turbine Hub,18 spline |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
PART#: JX-13-5
Reference Part#: JA-HT-5
|
description Turbine Hub |
Specifications |
Application
-
Jatco, Nissan & Other Japanese L3N71B, DA-5
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.48"
- Internal Teeth: 21
- Hardness: Heat Treated
|
Application
-
Mazda 4EAT-F ESCORT '96-UP, DA-50
|
|
description Turbine Hub |
Specifications |
Application
|
|
description Turbine Hub |
Specifications - Internal Teeth: 24
- Material: SAE 1045 Steel Forging
|
Application
-
Jatco, Nissan & Other Japanese RE5R05A DA-65 Nissan Titan 5.6L 2004-07
|
|
description Turbine Hub |
Specifications - Outer Dia: 2.28"
- Internal Teeth: 18
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese L3N71B, DA-5
|
PART#: JX-13-6
Reference Part#: JA-HT-8
|
description Turbine Hub |
Specifications - Outer Dia: 3.46"
- Internal Teeth: 18
- External teeth: 48
|
Application
-
Jatco, Nissan & Other Japanese L4N71B, DA-8
|
|
description Turbine Hub |
Specifications |
Application
-
Jatco, Nissan & Other Japanese L4N71B, DA-8
|
PART#: JX-13-7
Reference Part#: JA-HT-6
|
description Turbine Hub |
Specifications - Outer Dia: 3.55"
- Internal Teeth: 18
|
Application
-
Jatco, Nissan & Other Japanese RL3F01A, DA-6; RL4F02A, DA-13
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.55"
- Internal Teeth: 18
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese RL3F01A, DA-6; RL4F02A, DA-13
|
|
description Turbine Hub |
Specifications |
Application
-
Jatco, Nissan & Other Japanese L3N71B, DA-5
|
|
description Turbine Hub,Non-Lockup, Pulsar |
Specifications - Outer Dia: 3.55"
- Internal Teeth: 18
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese L3N71B, DA-5
|
PART#: JX-13-9
Reference Part#: MZ-HT-4
|
description Turbine Hub |
Specifications - Outer Dia: 3.67"
- Internal Teeth: 18
|
Application
-
Jatco, Nissan & Other Japanese F3A, DA-12-TT
-
Subaru Lockup And Non-Lockup (Antique), Smooth Impeller (SU-2...),Ribbed Impeller (SU-1), Centrifugal Clutch (SU-4/5/7/8)
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.67"
- Internal Teeth: 18
- Hardness: Heat Treated
|
Application
-
Jatco, Nissan & Other Japanese F3A, DA-12-TT
-
Subaru Lockup And Non-Lockup (Antique), Smooth Impeller (SU-2...),Ribbed Impeller (SU-1), Centrifugal Clutch (SU-4/5/7/8)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 17 (POWERGLIDE)
- Material: STEEL
- USE SNAP RING WH-202, BEARING NTA-3244
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 24 (CHRYSLER)
- Material: STEEL
- USE SNAP RING WH-202, BEARING NTA-3244
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 26 (FORD)
- Material: STEEL
- USE SNAP RING WH-202, BEARING NTA-3244
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27 (GM)
- Material: STEEL
- USE SNAP RING WH-202, BEARING NTA-3244
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30 (GM)
- Material: STEEL
- USE SNAP RING WH-202, BEARING NTA-3244
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 31 (FORD)
- Material: STEEL
- USE SNAP RING WH-202, BEARING NTA-3244
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
PART#: MX-13-17
Reference Part#: CV-HT-4
|
description Turbine Hub |
Specifications - Internal Teeth: 17 (POWERGLIDE)
- Material: STEEL
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications |
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 24 (CHRYSLER)
- Material: STEEL
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 26 (FORD)
- Material: STEEL
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27 (GM)
- Material: STEEL
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 17 (POWERGLIDE)
- Material: STEEL
- USE BUSHING 86000(02649)-02649(86000), BEARING NTA-2840, NTA 2233
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 19 (CHRYSLER)
- Material: STEEL
- USE BUSHING 86000(02649)-02649(86000), BEARING NTA-2840, NTA 2233
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 24 (CHRYSLER)
- Material: STEEL
- USE BUSHING 86000(02649)-02649(86000), BEARING NTA-2840, NTA 2233
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27 (GM)
- Material: STEEL
- USE BUSHING 86000(02649)-02649(86000), BEARING NTA-2840, NTA 2233
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30 (GM)
- Material: STEEL
- USE BUSHING 86000(02649)-02649(86000), BEARING NTA-2840, NTA 2233
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 31 (FORD)
- Material: STEEL
- USE BUSHING 86000(02649)-02649(86000), BEARING NTA-2840, NTA 2233
|
Application
-
High Performance Opel (HP)
|
PART#: MX-13-30
Reference Part#: CV-HT-5
|
description Turbine Hub |
Specifications - Internal Teeth: 30 (GM)
- Material: STEEL
|
Application
-
General Motors Powerglide
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications |
Application
-
General Motors Powerglide
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 31 (FORD)
- Material: STEEL
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 17 (POWERGLIDE)
- Material: STEEL
- USE BUSHING 84007, BEARING NTA-3244, NTA 2233
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 24 (CHRYSLER)
- Material: STEEL
- USE BUSHING 84007, BEARING NTA-3244, NTA 2233
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 26 (FORD)
- Material: STEEL
- USE BUSHING 84007, BEARING NTA-3244, NTA 2233
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27 (GM)
- Material: STEEL
- USE BUSHING 84007, BEARING NTA-3244, NTA 2233
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30 (GM)
- Material: STEEL
- USE BUSHING 84007, BEARING NTA-3244, NTA 2233
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 31 (FORD)
- Material: STEEL
- USE BUSHING 84007, BEARING NTA-3244, NTA 2233
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 17 (POWERGLIDE)
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 19 (CHRYSLER)
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 24 (CHRYSLER)
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 26 (FORD)
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications |
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 29 (FORD)
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications |
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 31 (FORD)
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 17 (POWERGLIDE)
- Material: STEEL
- USE SNAP RING WH-250, BEARING NTA-2840
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 24 (CHRYSLER)
- Material: STEEL
- USE SNAP RING WH-250, BEARING NTA-2840
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 26 (FORD)
- Material: STEEL
- USE SNAP RING WH-250, BEARING NTA-2840
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27 (GM)
- Material: STEEL
- USE SNAP RING WH-250, BEARING NTA-2840
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30 (GM)
- Material: STEEL
- USE SNAP RING WH-250, BEARING NTA-2840
|
Application
-
High Performance Opel (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 31 (FORD)
- Material: STEEL
- USE SNAP RING WH-250, BEARING NTA-2840
|
Application
-
High Performance Opel (HP)
|
PART#: PX-13
Reference Part#: FS-HT-6
|
description Turbine Hub |
Specifications - Outer Dia: 3.5"
- Internal Teeth: 26
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
PART#: PX-13-1
Reference Part#: FS-HT-8
|
description Turbine Hub |
Specifications - Outer Dia: 3.5"
- Internal Teeth: 27
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
PART#: PX-13-10
Reference Part#: FS-HT-10
|
description Turbine Hub |
Specifications - Outer Dia: 4.14"
- Internal Teeth: 27
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.14"
- Internal Teeth: 27
- Hardness: Heat Treated
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
PART#: PX-13-11
Reference Part#: FS-HT-9
|
description Turbine Hub |
Specifications - Outer Dia: 3.5"
- Internal Teeth: 22
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.5000
- Internal Teeth: 22
|
Application
|
PART#: PX-13-12
Reference Part#: FS-HT-11
|
description Turbine Hub |
Specifications - Outer Dia: 3.89"
- Internal Teeth: 27
|
Application
-
ZF ZF4HP22, BM-25, BMW & BM-27, '90 Jaguar
-
ZF ZF4HP24
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.89"
- Internal Teeth: 27
- Hardness: Heat Treated
|
Application
-
ZF ZF4HP22, BM-25, BMW & BM-27, '90 Jaguar
-
ZF ZF4HP24
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.56"
- Internal Teeth: 27
|
Application
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27
- Hardness: Heat Treated
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.56"
- Internal Teeth: 27
- Hardness: Heat Treated
|
Application
-
ZF ZF5HP30, 5 Speed, BM-29
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.14"
- Internal Teeth: 27
- Hardness: Heat Treated
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.56"
- Internal Teeth: 27
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.5600
- Internal Teeth: 27
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.015"
- Internal Teeth: 27
- Hardness: Heat Treated
|
Application
-
ZF ZF5HP19 FL (Captive Clutch)
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.06"
- Internal Teeth: 27
- Hardness: Heat Treated
- Without Oil Grooves
|
Application
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27
- Hardness: Heat Treated
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
PART#: PX-13-2
Reference Part#: FS-HT-1
|
description Turbine Hub |
Specifications - Outer Dia: 3.5"
- Internal Teeth: 27
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.06"
- Internal Teeth: 27
- Hardness: Heat Treated
- with Oil Grooves
|
Application
|
|
description Insert |
Specifications - Height: 0.95"
- Outer Dia: 1.31"
- Internal Teeth: 26
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
PART#: PX-13-27
Reference Part#: FS-I-27
|
description Insert,Ez-Weld™ |
Specifications - Height: .950"
- Outer Dia: 1.312"
- Internal Teeth: 27
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
-
ZF BMW (BABY, 318) 254mm, BM-12
-
ZF ZF NON-LOCKUP
|
|
description Insert,Ez-Weld™ |
Specifications - Height: 1.375"
- Outer Dia: 1.258"
- Internal Teeth: 27
- With Seal Bore
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
-
ZF BMW (BABY, 318) 254mm, BM-12
-
ZF ZF NON-LOCKUP
|
|
description Insert |
Specifications - Height: 1.50"
- Outer Dia: 1.31"
- Internal Teeth: 27
- With Seal Bore
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.5000
- Internal Teeth: 27
|
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.50"
- Internal Teeth: 29
- Uses 16 rivets (PX-12 or
PX-12L)
|
Application
|
PART#: PX-13-4
Reference Part#: FS-HT-3
|
description Turbine Hub |
Specifications - Outer Dia: 3.5"
- Internal Teeth: 27
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.5"
- Internal Teeth: 27
- Hardness: Heat Treated
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
PART#: PX-13-5
Reference Part#: FS-HT-5
|
description Turbine Hub |
Specifications - Outer Dia: 3.34"
- Internal Teeth: 27
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
-
ZF BMW (BABY, 318) 254mm, BM-12
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.34"
- Internal Teeth: 27
- Hardness: Heat Treated
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
-
ZF BMW (BABY, 318) 254mm, BM-12
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.5"
- Internal Teeth: 27
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
PART#: PX-13-7
Reference Part#: FS-HT-4
|
description Turbine Hub |
Specifications - Outer Dia: 3.5"
- Internal Teeth: 27
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.5"
- Internal Teeth: 27
- Hardness: Heat Treated
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
PART#: PX-13-8
Reference Part#: FS-HT-2
|
description Turbine Hub |
Specifications - Outer Dia: 3.5"
- Internal Teeth: 27
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.5"
- Internal Teeth: 27
- Hardness: Heat Treated
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
PART#: PX-13-9
Reference Part#: FS-HT-7
|
description Turbine Hub |
Specifications - Outer Dia: 3.89"
- Internal Teeth: 27
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.89"
- Internal Teeth: 27
- Hardness: Heat Treated
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
PART#: PX-13HT
Reference Part#: FS-HT-6HS
|
description Turbine Hub |
Specifications - Internal Teeth: 26
- Hardness: Heat Treated
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30 (2 Teeth Removed)
- Hardness: Heat Treated
|
Application
-
Renault, Peugeot Renault (DPO), Peugeot (AL4), Early
-
Renault, Peugeot Renault (DPO), Peugeot (AL4), Late
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.24"
- Internal Teeth: 30
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
|
|
description Turbine Hub |
Specifications - Outer Dia: 5.71"
- Internal Teeth: 35
- External teeth: 102
|
Application
-
General Motors 310mm Lockup, 4L80E Single Stator and Dual Stator
|
|
description Turbine Hub |
Specifications - Outer Dia: 5.71"
- Internal Teeth: 35
- External teeth: 102
- Hardness: Heat Treated
|
Application
-
General Motors 310mm Lockup, 4L80E Single Stator and Dual Stator
|
PART#: SX-13-11
Reference Part#: GM-HT-8
|
description Turbine Hub |
Specifications - Outer Dia: 4.25"
- Internal Teeth: 24
|
Application
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
-
Borg Warner BorgWarner BW/Chrysler 310mm NLU
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.25"
- Internal Teeth: 24
- Hardness: Heat Treated
|
Application
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
-
Borg Warner BorgWarner BW/Chrysler 310mm NLU
|
PART#: SX-13-12
Reference Part#: GM-HT-3
|
description Turbine Hub |
Specifications - Hardness: Heat Treated
- Adapt 254mm (TH125) converter to 30 spline high performance application
|
Application
-
General Motors 254mm, TH125, Non-Lockup
-
High Performance GM (TH125) To GM (HP)
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.44"
- Internal Teeth: 30
- Hardness: Heat Treated
|
Application
-
General Motors 254mm, TH125, Non-Lockup
-
High Performance GM (TH125) To GM (HP)
|
PART#: SX-13-14
Reference Part#: GM-HT-9
|
description Turbine Hub |
Specifications - Outer Dia: 4.27"
- Internal Teeth: 23
- External teeth: 34
|
Application
-
Chrysler 310mm Lockup, 47RH, A-618
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.27"
- Internal Teeth: 23
- External teeth: 34
- Hardness: Heat Treated
|
Application
-
Chrysler 310mm Lockup, 47RH, A-618
|
PART#: SX-13-15
Reference Part#: GM-HT-4
|
description Turbine Hub |
Specifications - Outer Dia: 4.08"
- Internal Teeth: 19
- External teeth: 30
|
Application
-
General Motors 228mm Saturn
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.5"
- Internal Teeth: 30
- For O.E.Turbines, Weld-In, .22" Thick Flange
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.5"
- Internal Teeth: 30
- Hardness: Heat Treated
- For O.E.Turbines, Weld-In, .22" Thick Flange
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.45"
- Internal Teeth: 27
|
Application
-
General Motors TH200
-
General Motors 254mm, TH125, Non-Lockup
|
PART#: SX-13-27
Reference Part#: GM-I-27
|
description Insert |
Specifications - Height: 1.2"
- Outer Dia: 1.53"
- Internal Teeth: 27
- External teeth: 30
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub,First Type, Plug |
Specifications - Height: 1.75"
- Outer Dia: 1.53"
- Internal Teeth: 27
- External teeth: 30
- (For 30 Spline High Performance, use SX-13-30C)
|
Application
-
General Motors 245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
|
|
description Insert,Flanged Retrofit |
Specifications - Height: 1.72"
- Outer Dia: 2.31"
- Internal Teeth: 27
- External teeth: 30
- (30 Spline High Performance SX-13-30F)
|
Application
-
General Motors 245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
|
|
description Insert |
Specifications - Height: 1.12"
- Outer Dia: 2.25"
- Internal Teeth: 27
- External teeth: 30
- For O.E.Turbines, Weld-In, Tapered Flange
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Height: 1.12"
- Outer Dia: 2.25"
- Internal Teeth: 27
- External teeth: 30
- Hardness: Heat Treated
- For O.E.Turbines, Weld-In, Tapered Flange
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Insert |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Height: 1.2"
- Outer Dia: 1.53"
- Internal Teeth: 27
- External teeth: 30
- Hardness: Heat Treated
- For O.E.Turbines, Weld-In, O.E. Style
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications |
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.3"
- Internal Teeth: 27
- External teeth: 30
- Hardness: Heat Treated
- For O.E.Turbines, Weld-In, E-Z Weld Flange, , Fastest Installation
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub,For O.E.Turbines Weld-In |
Specifications - Internal Teeth: 27
- .20" Thick Flange
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications |
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27
- Hardness: Heat Treated
- For O.E.Turbines, Weld-In, .084" Thick Flange
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Insert,Salvage Type |
Specifications - Height: 1.190"
- Outer Dia: 1.187"
- Internal Teeth: 27
- 4.33"
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27
- External teeth: 30
- Use with rivets SX-12-4
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
PART#: SX-13-30
Reference Part#: GM-I-30
|
description Turbine Hub |
Specifications - Height: 1.2"
- Outer Dia: 1.53"
- Internal Teeth: 30
- External teeth: 30
- For O.E.Turbines, Weld-In, O.E. Style, 30 Spline
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub,First Type, Plug |
Specifications - Height: 1.75"
- Inner Dia: .932"
- Internal Teeth: 30
- External teeth: 30
|
Application
-
General Motors 245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
|
|
description Turbine Hub,Flanged |
Specifications |
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
-
General Motors 245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
|
|
description Insert |
Specifications - Height: 1.12"
- Outer Dia: 2.25"
- Internal Teeth: 30
- External teeth: 30
- For O.E.Turbines, Weld-In, Tapered Flange
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Height: 1.12"
- Outer Dia: 2.25"
- Internal Teeth: 30
- External teeth: 30
- Hardness: Heat Treated
- For O.E.Turbines, Weld-In, Tapered Flange
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30
- Hardness: Heat Treated
- For O.E.Turbines, Weld-In, Straight Flange
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
-
General Motors 245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
|
|
description Insert,Straight Flange, 30 Spline |
Specifications |
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30
- External teeth: 30
- Hardness: Heat Treated
- For O.E.Turbines, Weld-In, E-Z Weld Flange, Fastest Installation
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30
- For O.E.Turbines, Weld-In, .20" Thick Flange
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications |
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30
- Hardness: Heat Treated
- For O.E.Turbines, Weld-In, .084" Thick Flange
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Insert |
Specifications - Height: 1.19"
- Outer Dia: 1.19"
- Internal Teeth: 30
|
Application
-
General Motors Miscellaneous/Multi-Purpose (GM)
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.5"
- Internal Teeth: 27
- External teeth: 30
- For O.E.Turbines, Weld-In, .22" Thick Flange
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.5"
- Internal Teeth: 27
- External teeth: 30
- Hardness: Heat Treated
- For O.E.Turbines, Weld-In, .22" Thick Flange
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub,Allows To Adapt A 245mm Converters To TH350 & TH400 Non-Lockup Racing Converter |
Specifications |
Application
-
High Performance GM 245M M To TH-350 (HP)
|
|
description Turbine Hub,For PHD |
Specifications |
Application
-
High Performance GM 245M M To TH-350 (HP)
|
|
description Turbine Hub,Allison 1000, 2000, 2400 |
Specifications |
Application
-
Allison 1000/2000/2400 Series, Lockup
|
|
description Turbine Hub |
Specifications - Internal Teeth: 25
- External teeth: 40
- Hardness: Heat Treated
|
Application
-
Allison 1000/2000/2400 Series, Lockup
|
|
description Turbine Hub |
Specifications - Outer Dia: 5.71"
- Internal Teeth: 35
- External teeth: 102
- Hardness: Heat Treated
|
Application
-
General Motors 310mm Lockup, 4L80E Late (Single Stator)
|
|
description Turbine Hub,Relieve The Shortage Of TH350 Lockup Cores |
Specifications |
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
-
General Motors TH200
-
High Performance GM TH-200 To TH350 Lockup (HP)
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.51"
- Internal Teeth: 30
- Hardness: Heat Treated
- Converts TH200 To TH350 Non-Lockup, Use With Fiber Or Plastic Washer
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
-
General Motors TH200
-
High Performance GM TH-200 To TH350 Lockup (HP)
|
|
description Turbine Hub,TH-350/400 Spline |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Hardness: Heat Treated
- 55 Ext., 30 Int. Spline, 4.66" O.D.
|
Application
-
General Motors 300mm Lockup, 4L60E
|
|
description Turbine Hub,10" 245mm T-350/400 Spline |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Hardness: Heat Treated
- For O.E.Turbines, Rivet-In, 27 Splines, Use SX-12-4 Rivet
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - For O.E.Turbines, Rivet-In, 30 Splines, Use SX-12-4 Rivet
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 36
- External teeth: 55
- Material: Steel
|
Application
-
General Motors 6L80, 6L80E, 6L90 300mm
|
|
description Turbine Hub |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27
- Material: Steel
|
Application
-
Ford 6F50/6F55
-
General Motors 6T70 / 6T75
|
|
description Turbine Hub,GM 298mm |
Specifications - Internal Teeth: 30
- External teeth: 30
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Hardness: Heat Treated
- For O.E.Turbines, Rivet-In, 30 Splines, Use SX-12-4 Rivet
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
PART#: SX-13-5
Reference Part#: GM-HT-5
|
description Turbine Hub |
Specifications - Internal Teeth: 27
- External teeth: 30
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications |
Application
-
General Motors 5L40E BMW Lockup
|
|
description Turbine Hub |
Specifications - Hardness: Heat Treated
- Retains Lockup Function, 27 Splines, Use FX-12 Rivets
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
PART#: SX-13-6
Reference Part#: GM-HT-6
|
description Turbine Hub |
Specifications - Internal Teeth: 30
- Retains Lockup Function, 30 Splines, Uses FX-12 Rivets
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications |
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30
- Lockup Eliminator, 30 Splines, Uses FX-12 Rivets
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications - Hardness: Heat Treated
- Lockup Eliminator, 30 Splines, Uses FX-12 Rivets
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
|
description Turbine Hub |
Specifications |
Application
-
General Motors TH180 (TH-180 Strasbourg, Tri-matic, GM-3, Corvair, Tempest)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 22
- Hardness: Heat Treated
|
Application
-
General Motors TH180 (TH-180 Strasbourg, Tri-matic, GM-3, Corvair, Tempest)
|
PART#: SX-13S
Reference Part#: GM-HT
|
description Turbine Hub |
Specifications |
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
|
PART#: SX-13SHT
Reference Part#: GM-HT-HS
|
description Turbine Hub,Heavy Duty |
Specifications - Outer Dia: 4.24"
- Internal Teeth: 30
- Hardness: Heat Treated
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
|
|
description Fixture,Hub Installation |
Specifications |
Application
-
General Motors 245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
|
|
description Turbine Hub |
Specifications |
Application
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Turbine Hub |
Specifications - Internal Teeth: 17 (GM)
- USE WITH TB-18-4 BUSHING AND TW-2-4 BEARING
|
Application
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
-
High Performance Chrysler 9-1/2" & 10" (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 24 (CHRYSLER)
- USE WITH TB-18-4 BUSHING AND TW-2-4 BEARING
|
Application
-
High Performance Chrysler 9-1/2" & 10" (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 26 (FORD)
- USE WITH TB-18-4 BUSHING AND TW-2-4 BEARING
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications |
Application
-
High Performance Ford To Chrysler (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27 (GM)
- USE WITH TB-18-4 BUSHING AND TW-2-4 BEARING
|
Application
-
High Performance Chrysler 9-1/2" & 10" (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27 (CHRYSLER)
- USE WITH TB-18-4 BUSHING AND TW-2-4 BEARING
|
Application
-
High Performance Chrysler 9-1/2" & 10" (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 30 (GM)
- USE WITH TB-18-4 BUSHING AND TW-2-4 BEARING
|
Application
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
-
High Performance Chrysler 9-1/2" & 10" (HP)
|
|
description Turbine Hub |
Specifications - Internal Teeth: 31 (FORD)
- USE WITH TB-18-4 BUSHING AND TW-2-4 BEARING
|
Application
-
High Performance Chrysler 9-1/2" & 10" (HP)
|
PART#: TX-13-11
Reference Part#: MT-HT-175
|
description Turbine Hub |
Specifications |
Application
-
Mitsubishi KM-175 Lockup, CT-7, CT-9
|
|
description Turbine Hub |
Specifications - Internal Teeth: 24
- Hardness: Heat Treated
|
Application
-
Mitsubishi KM-175 Lockup, CT-7, CT-9
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.47"
- Internal Teeth: 22
|
Application
-
Mitsubishi KM-170 Non-Lockup, CT-5
|
|
description Turbine Hub |
Specifications |
Application
-
Mitsubishi KM-170 Non-Lockup, CT-5
|
PART#: TX-13-13
Reference Part#: CH-HT-670
|
description Turbine Hub |
Specifications |
Application
-
Chrysler 9-1/2" Lockup, A-470, A-670, A-604, FWD
-
Chrysler 10" 254mm Lockup, A-606, FWD
|
|
description Turbine Hub |
Specifications - Internal Teeth: 22
- Hardness: Heat Treated
|
Application
-
Chrysler 9-1/2" Lockup, A-470, A-670, A-604, FWD
-
Chrysler 10" 254mm Lockup, A-606, FWD
|
PART#: TX-13-14
Reference Part#: CH-HT-9
|
description Turbine Hub |
Specifications - Outer Dia: 4.37"
- Internal Teeth: 24
|
Application
-
Chrysler 9-1/2" Lockup, A-470, A-670, A-604, FWD
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.37"
- Internal Teeth: 24
- Hardness: Heat Treated
|
Application
-
Chrysler 9-1/2" Lockup, A-470, A-670, A-604, FWD
|
PART#: TX-13-15
Reference Part#: MT-HT-176
|
description Turbine Hub |
Specifications |
Application
-
Mitsubishi KM-176 Lockup, CT-11
|
|
description Turbine Hub |
Specifications - Internal Teeth: 20
- Hardness: Heat Treated
|
Application
-
Mitsubishi KM-176 Lockup, CT-11
|
|
description Turbine Hub |
Specifications |
Application
-
Mitsubishi KM-176 Lockup, CT-11
|
PART#: TX-13-16
Reference Part#: MT-HT-1
|
description Turbine Hub |
Specifications |
Application
-
Mitsubishi KM-175-5, KM-177 Lockup, CT-12
|
|
description Turbine Hub |
Specifications - Internal Teeth: 20
- Hardness: Heat Treated
|
Application
-
Mitsubishi KM-175-5, KM-177 Lockup, CT-12
|
|
description Turbine Hub |
Specifications |
Application
-
Mitsubishi KM-175-5, KM-177 Lockup, CT-12
|
PART#: TX-13-17
Reference Part#: MT-HT-177
|
description Turbine Hub |
Specifications |
Application
-
Mitsubishi KM 175 & 177 Non-Lockup, CT-9
|
|
description Turbine Hub |
Specifications - Outer Dia: 2.75"
- Internal Teeth: 20
- Hardness: Heat Treated
|
Application
-
Mitsubishi KM 175 & 177 Non-Lockup, CT-9
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.62"
- Internal Teeth: 20
- Hardness: Heat Treated
|
Application
-
Mitsubishi KM-175 & KM-176 LOCKUP, CT-15
|
PART#: TX-13-19
Reference Part#: MT-HT-2
|
description Turbine Hub |
Specifications |
Application
-
Mitsubishi KM-175-5, KM-177 Lockup, CT-12
-
Mitsubishi F4A22 & F4A23
|
|
description Turbine Hub |
Specifications - Internal Teeth: 20
- Hardness: Heat Treated
|
Application
-
Mitsubishi KM-175-5, KM-177 Lockup, CT-12
-
Mitsubishi F4A22 & F4A23
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27
- Material: Solid Steel
|
Application
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.96"
- Internal Teeth: 19
|
Application
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
|
|
description Insert,Ez Weld™ |
Specifications - Height: 0.62"
- Outer Dia: 1"
- Internal Teeth: 24
|
Application
-
Mitsubishi KM-175 Lockup, CT-7, CT-9
|
|
description Insert |
Specifications - Height: 1.37"
- Outer Dia: 1.12"
- Internal Teeth: 27
|
Application
-
Chrysler Dodge Colt, Plymouth Arrow & Cricket & Japanese Chrysler, '74-'78
|
PART#: TX-13-28
Reference Part#: CH-HT-12
|
description Turbine Hub |
Specifications |
Application
-
Chrysler 10-3/4" Lockup, Late, A-500, A-518, RWD
|
|
description Turbine Hub,With Square Washer Boss |
Specifications - Internal Teeth: 23
- Hardness: Heat Treated
- A-518
|
Application
-
Chrysler 10-3/4" Lockup, Late, A-500, A-518, RWD
|
PART#: TX-13-29
Reference Part#: CH-HT-13
|
description Turbine Hub |
Specifications |
Application
-
Chrysler 10-3/4" Lockup, Late, A-500, A-518, RWD
|
|
description Turbine Hub,With Square Washer Boss |
Specifications - Internal Teeth: 26
- Hardness: Heat Treated
|
Application
-
Chrysler 10-3/4" Lockup, Late, A-500, A-518, RWD
|
|
description Turbine Hub |
Specifications - Height: 1.40"
- Outer Dia: 3.96"
- Internal Teeth: 19
- 1.39" Journal Dia.
|
Application
-
Industrial Chrysler Industrial, TF-8
|
|
description Turbine Hub |
Specifications |
Application
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
|
|
description Turbine Hub |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
PART#: TX-13-32
Reference Part#: MT-HT-3
|
description Turbine Hub |
Specifications |
Application
-
Mitsubishi KM-175-5, KM-177 Lockup, F4A43, CT-12-1, CT- 18, Late
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.22"
- Internal Teeth: 20
- Hardness: Heat Treated
|
Application
-
Mitsubishi KM-175-5, KM-177 Lockup, F4A43, CT-12-1, CT- 18, Late
|
|
description Turbine Hub |
Specifications |
Application
|
|
description Turbine Hub |
Specifications - Internal Teeth: 20
- Hardness: Heat Treated
|
Application
|
|
description Turbine Hub |
Specifications |
Application
-
Mitsubishi F4A42, GALANT '99, CT-26; F4A41, F4A52 CT-27
|
|
description Turbine Hub |
Specifications - Internal Teeth: 16
- Hardness: Heat Treated
|
Application
-
Mitsubishi F4A42, GALANT '99, CT-26; F4A41, F4A52 CT-27
|
PART#: TX-13-35
Reference Part#: MT-HT-5
|
description Turbine Hub |
Specifications - Outer Dia: 3.48"
- Internal Teeth: 20
|
Application
-
Mitsubishi KM-175-5, KM-177 Lockup, F4A43, CT-12-1, CT- 18, Late
-
Mitsubishi F4A42, GALANT '99, CT-26; F4A41, F4A52 CT-27
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.48"
- Internal Teeth: 20
- Hardness: Heat Treated
|
Application
-
Mitsubishi KM-175-5, KM-177 Lockup, F4A43, CT-12-1, CT- 18, Late
-
Mitsubishi F4A42, GALANT '99, CT-26; F4A41, F4A52 CT-27
|
|
description Turbine Hub |
Specifications - Internal Teeth: 20
- Hardness: Heat Treated
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.09"
- Internal Teeth: 20
- Hardness: Heat Treated
|
Application
-
Toyota Mitsubishi MF '99-'00
-
Mitsubishi KM-175-5, KM-177 Lockup, F4A43, CT-12-1, CT- 18, Late
-
Mitsubishi F4A42
|
|
description Turbine Hub,Chyrsler 45RFE |
Specifications |
Application
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.28"
- Internal Teeth: 29
- Hardness: Heat Treated
|
Application
|
|
description Turbine Hub |
Specifications - Height: 1.23"
- Outer Dia: 3.96"
- Internal Teeth: 24
- Material: Solid Steel
|
Application
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
|
|
description Turbine Hub |
Specifications - Height: 1.40"
- Outer Dia: 3.96"
- Internal Teeth: 24
- 1.39" Journal Dia.
|
Application
-
Industrial Chrysler Industrial, TF-8
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
|
PART#: TX-13-4
Reference Part#: CH-HT-4
|
description Turbine Hub |
Specifications |
Application
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Turbine Hub,10" 245mm Chrysler 727 Spline |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.10"
- Internal Teeth: 22
- Hardness: Heat Treated
|
Application
|
|
description Turbine Hub |
Specifications - Internal Teeth: 22
- Material: Hardened Steel
|
Application
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27
- Material: Steel
|
Application
-
Chrysler 68RFE, 6.7L Cummins Diesel
|
|
description Turbine Hub |
Specifications |
Application
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Turbine Hub |
Specifications |
Application
-
Industrial Chrysler Industrial, TF-8
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Turbine Hub |
Specifications |
Application
-
Industrial Chrysler Industrial, TF-8
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Kit,Turbine Hub |
Specifications |
Application
-
Industrial Chrysler Industrial, TF-8
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
|
PART#: TX-13-5S
Reference Part#: CH-HT-1
|
description Turbine Hub |
Specifications |
Application
-
Industrial Chrysler Industrial, TF-8
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
|
PART#: TX-13-6
Reference Part#: CH-HT-2
|
description Turbine Hub |
Specifications - Outer Dia: 4.26"
- Internal Teeth: 26
|
Application
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.26"
- Internal Teeth: 26
|
Application
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Turbine Hub |
Specifications - Outer Dia: 4.26"
- Internal Teeth: 23
|
Application
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
PART#: TX-13-7S
Reference Part#: CH-HT-10
|
description Turbine Hub |
Specifications - Outer Dia: 4.26"
- Internal Teeth: 23
|
Application
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
PART#: TX-13-8
Reference Part#: CH-HT-6
|
description Turbine Hub |
Specifications |
Application
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
|
|
description Turbine Hub |
Specifications |
Application
-
Chrysler Miscellaneous/Multi-Purpose (Chrysler)
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.96"
- Internal Teeth: 23
|
Application
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.96"
- Internal Teeth: 23
- Hardness: Heat Treated
|
Application
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
|
|
description Turbine Hub |
Specifications |
Application
-
Chrysler Dodge Colt, Plymouth Arrow & Cricket & Japanese Chrysler, '74-'78
|
|
description Beefplate™,To Salvage Ripped Turbines |
Specifications |
Application
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
|
PART#: VX-13
Reference Part#: VW-HT-1
|
description Turbine Hub |
Specifications |
Application
-
Volkswagen / Audi VW 010
-
ZF Volkswagen & Audi Fully Automatic (Antique)
|
|
description Turbine Hub |
Specifications |
Application
-
ZF Volkswagen Stick Auto (Antique)
-
ZF NSU with 138 Tooth Ring Gear (Antique)
|
|
description Turbine Hub |
Specifications |
Application
-
Volkswagen / Audi VW 095, 096
|
|
description Turbine Hub |
Specifications - Internal Teeth: 36
- Hardness: Heat Treated
- Weld-In, Rivet Type
|
Application
-
Volkswagen / Audi VW 095, 096
|
|
description Turbine Hub |
Specifications - Internal Teeth: 36
- Will Accommodate All Washers. See illustration
|
Application
-
Volkswagen / Audi VW 097, 098
|
|
description Turbine Hub |
Specifications - Internal Teeth: 36
- Hardness: Heat Treated
- Will Accommodate All Washers. See illustration
|
Application
-
Volkswagen / Audi VW 097, 098
|
PART#: WX-13-1
Reference Part#: BW-HT-7
|
description Turbine Hub |
Specifications - Internal Teeth: 22
- Use With Bronze Washer
|
Application
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
|
PART#: WX-13-10
Reference Part#: BW-HT-11
|
description Turbine Hub |
Specifications |
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
|
|
description Turbine Hub |
Specifications - Height: 1.22"
- Outer Dia: 3.45"
- Internal Teeth: 23
- Hardness: Heat Treated
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
|
|
description Turbine Hub |
Specifications |
Application
-
Borg Warner 11" Industrial
|
|
description Turbine Hub |
Specifications |
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Industrial
|
|
description Turbine Hub |
Specifications - Internal Teeth: 27
- Hardness: Heat Treated
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Industrial
|
PART#: WX-13-14
Reference Part#: BW-HT-15
|
description Turbine Hub |
Specifications - Outer Dia: 3.45"
- Internal Teeth: 20
|
Application
-
Borg Warner 11" Industrial
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.45"
- Internal Teeth: 20
- Hardness: Heat Treated
|
Application
-
Borg Warner 11" Industrial
|
|
description Insert |
Specifications - Internal Teeth: 15
- Hardness: Heat Treated
|
Application
-
Borg Warner 11" Industrial
|
|
description Insert |
Specifications - Height: 0.88"
- Outer Dia: 1.13"
- Internal Teeth: 17
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 11" Industrial
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.81"
- Internal Teeth: 22
|
Application
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.81"
- Internal Teeth: 22
- Hardness: Heat Treated
|
Application
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
PART#: WX-13-2
Reference Part#: BW-HT-8
|
description Turbine Hub |
Specifications - Internal Teeth: 23
- Use With Bronze Washer
|
Application
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
|
|
description Insert,Easy- Weld, Non-Lpckup |
Specifications - Height: 0.88"
- Outer Dia: 1"
- Internal Teeth: 22
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
-
Mitsubishi KM-170 Non-Lockup, CT-5
|
|
description Insert |
Specifications - Height: 0.88"
- Outer Dia: 1"
- Internal Teeth: 23
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
PART#: WX-13-26
Reference Part#: BW-I-26
|
description Insert,Non-Lockup (Also B.W.) |
Specifications - Height: 0.88"
- Outer Dia: 1.13"
- Internal Teeth: 26
|
Application
-
Toyota A-41, A-42DL Non-Lockup
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Insert |
Specifications - Height: 1.03"
- Outer Dia: 1.19"
- Internal Teeth: 29
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 11" Industrial
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.81"
- Internal Teeth: 23
- Hardness: Heat Treated
|
Application
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
PART#: WX-13-3
Reference Part#: BW-HT-10
|
description Turbine Hub |
Specifications - Internal Teeth: 22
- Use With Fiber Washer
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
|
|
description Turbine Hub,Btr |
Specifications |
Application
|
|
description Turbine Hub |
Specifications - Height: 2.05"
- Outer Dia: 3.66"
- Internal Teeth: 29
- External teeth: 30
- Hardness: Heat Treated
|
Application
|
|
description Turbine Hub |
Specifications |
Application
-
Industrial Borg Warner Industrial 310 mm, Lockup & Non-Lockup
|
|
description Turbine Hub |
Specifications - Height: 1.28"
- Outer Dia: 5.15"
- Internal Teeth: 29
- Hardness: Heat Treated
|
Application
-
Industrial Borg Warner Industrial 310 mm, Lockup & Non-Lockup
|
|
description Turbine Hub |
Specifications - Height: 1.22"
- Outer Dia: 3.45"
- Internal Teeth: 22
- Hardness: Heat Treated
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
|
PART#: WX-13-4
Reference Part#: BW-HT-9
|
description Turbine Hub |
Specifications - Internal Teeth: 26
- Use With Fiber Washer
|
Application
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
|
PART#: WX-13-5
Reference Part#: BW-HT-1
|
description Turbine Hub |
Specifications - Outer Dia: 3.45"
- Internal Teeth: 15
|
Application
-
Borg Warner 11" Industrial
|
|
description Turbine Hub |
Specifications |
Application
-
Borg Warner 11" Industrial
|
|
description Turbine Hub |
Specifications - Internal Teeth: 19
- Hardness: Heat Treated
- Deep Cavity (.62" Depth)
|
Application
-
Borg Warner 11" Industrial
|
|
description Turbine Hub |
Specifications |
Application
-
Borg Warner 11" Industrial
|
PART#: WX-13-6S
Reference Part#: BW-HT-3
|
description Turbine Hub |
Specifications - Internal Teeth: 19
- Shallow Recess
|
Application
-
Borg Warner 11" Industrial
|
|
description Turbine Hub |
Specifications - Internal Teeth: 19
- Hardness: Heat Treated
- Shallow Cavity (.38" Depth)
|
Application
-
Borg Warner 11" Industrial
|
PART#: WX-13-7
Reference Part#: BW-HT-5
|
description Turbine Hub |
Specifications - Height: 1.45"
- Outer Dia: 3.45"
- Internal Teeth: 17
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 11" Industrial
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.81"
- Internal Teeth: 17
|
Application
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Turbine Hub |
Specifications |
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 11" Industrial
|
PART#: WX-13-8
Reference Part#: BW-HT-4
|
description Turbine Hub |
Specifications |
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 11" Industrial
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.81"
- Internal Teeth: 29
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 11" Industrial
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Turbine Hub |
Specifications - Height: 1.45"
- Internal Teeth: 29
- Hardness: Heat Treated
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 11" Industrial
|
PART#: WX-13-9
Reference Part#: BW-HT-12
|
description Turbine Hub |
Specifications |
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 11" Industrial
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.81"
- Internal Teeth: 26
|
Application
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Turbine Hub,Bronze washer type |
Specifications - Outer Dia: 3.81"
- Internal Teeth: 26
- Hardness: Heat Treated
- Bronze Washer Type
|
Application
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.81"
- Internal Teeth: 26
- Hardness: Heat Treated
|
Application
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Turbine Hub |
Specifications - Height: 1.22"
- Outer Dia: 3.45"
- Internal Teeth: 26
- Hardness: Heat Treated
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 11" Industrial
|
PART#: YX-13
Reference Part#: TO-HT-102
|
description Turbine Hub |
Specifications |
Application
|
PART#: YX-13-1
Reference Part#: TO-HT-110
|
description Turbine Hub |
Specifications - Outer Dia: 4.33"
- Internal Teeth: 26
|
Application
-
Toyota A-140E
-
Toyota 2 & 3 Speed, Corrola 8-1/2" (241mm)/Corona 9-3/4" (248mm), '65-'76
|
|
description Turbine Hub |
Specifications - Height: 1.00"
- Outer Dia: 4.09"
- Internal Teeth: 26
- Uses 12 Rivets
|
Application
|
|
description Turbine Hub |
Specifications - Height: 1.00"
- Outer Dia: 4.09"
- Internal Teeth: 26
- Hardness: Heat Treated
- Uses 12 Rivets
|
Application
|
|
description Turbine Hub |
Specifications - Height: 1.115"
- Outer Dia: 4.41"
- Internal Teeth: 26
- Uses 12 Rivets
|
Application
|
|
description Turbine Hub |
Specifications - Height: 1.115"
- Outer Dia: 4.41"
- Internal Teeth: 26
- Hardness: Heat Treated
- Uses 12 Rivets
|
Application
|
PART#: YX-13-12HT
Reference Part#: TO-HT-3HSMOD , TO-HT-3HS
|
description Turbine Hub |
Specifications - Outer Dia: 3.96"
- Internal Teeth: 20
- Hardness: Heat Treated
|
Application
|
|
description Turbine Hub,U660E |
Specifications |
Application
|
PART#: YX-13-1HT
Reference Part#: TH-HT-110HS
|
description Turbine Hub |
Specifications - Outer Dia: 4.33"
- Internal Teeth: 26
- Hardness: Heat Treated
|
Application
-
Toyota A-140E
-
Toyota 2 & 3 Speed, Corrola 8-1/2" (241mm)/Corona 9-3/4" (248mm), '65-'76
|
PART#: YX-13-2
Reference Part#: TO-HT-68
|
description Turbine Hub |
Specifications |
Application
-
Toyota A-42/43/44/45 DE/DL Lockup
|
|
description Insert,Corona, Core Saver |
Specifications - Height: 0.8"
- Outer Dia: 0.96"
- Internal Teeth: 23
|
Application
-
Toyota 2 & 3 Speed, Corrola 8-1/2" (241mm)/Corona 9-3/4" (248mm), '65-'76
|
|
description Insert,Fixes All Toyota Lockups |
Specifications - Height: 1.1"
- Outer Dia: 1.25"
- Internal Teeth: 26
|
Application
-
Toyota A-130 Non-Lockup, MX-17
-
Toyota A-131L Lockup
-
Toyota A-140E
-
Toyota A40D/A43D/A44D Non-Lockup, Overdrive
-
Borg Warner Model 55, A-40, 9-3/4" (248mm), Volvo '73-Up
|
|
description Turbine Hub |
Specifications - Internal Teeth: 26
- Hardness: Heat Treated
|
Application
-
Toyota A-42/43/44/45 DE/DL Lockup
|
|
description Turbine Hub |
Specifications |
Application
-
Toyota A-41, A-42DL Non-Lockup
-
Toyota A-130 Non-Lockup, MX-17
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.70"
- Internal Teeth: 26
- Hardness: Heat Treated
|
Application
-
Toyota A-41, A-42DL Non-Lockup
-
Toyota A-130 Non-Lockup, MX-17
|
|
description Turbine Hub |
Specifications - Outer Dia: 3.77"
- Internal Teeth: 26
|
Application
-
Toyota A40D/A43D/A44D Non-Lockup, Overdrive
|
PART#: YX-13-5
Reference Part#: TO-HT-25
|
description Turbine Hub |
Specifications - Outer Dia: 3.89"
- Internal Teeth: 26
|
Application
-
Toyota A40D/A43D/A44D Non-Lockup, Overdrive
|
|
description Turbine Hub |
Specifications |
Application
|
|
description Turbine Hub |
Specifications - Internal Teeth: 20
- Hardness: Heat Treated
|
Application
|
PART#: YX-13-7
Reference Part#: TO-HT-68-12
|
description Turbine Hub |
Specifications |
Application
|
PART#: YX-13-7HT
Reference Part#: TO-HT-68-12HS
|
description Turbine Hub |
Specifications - Internal Teeth: 26
- Hardness: Heat Treated
|
Application
|
PART#: YX-13-8
Reference Part#: TO-HT-1
|
description Turbine Hub |
Specifications - Height: 1.025"
- Outer Dia: 4.09"
- Internal Teeth: 26
- Uses 16 Rivets
|
Application
|
|
description Turbine Hub |
Specifications - Height: 1.025"
- Outer Dia: 4.09"
- Internal Teeth: 26
- Hardness: Heat Treated
- Uses 16 Rivets
|
Application
|
|
description Turbine Hub |
Specifications - Height: 1.135"
- Outer Dia: 4.09"
- Internal Teeth: 20
- Hardness: Heat Treated
- Uses 16 Rivets
(Use YO-25-6
Metal Clad Seal)
|
Application
-
Toyota Mitsubishi MF '99-'00
-
Mitsubishi KM-175-5, KM-177 Lockup, F4A43, CT-12-1, CT- 18, Late
-
Mitsubishi F4A42
|
PART#: YX-13HT
Reference Part#: TO-HT-102HS
|
description Turbine Hub |
Specifications - Outer Dia: 4.01"
- Internal Teeth: 26
- Hardness: Heat Treated
|
Application
|