|
description Friction Plate |
Specifications - Outer Dia: 9.173"
- Inner Dia: 7.639"
- Thickness: 0.158"
|
Application
|
|
description Washer,Squared |
Specifications - Outer Dia: 2.52"
- Inner Dia: 1.39"
- Thickness: .1.00"
- Material: Steel
|
Application
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
|
|
description Stator Cap |
Specifications - Outer Dia: 2.63"
- Inner Dia: 1.35"
- Thickness: .65"
- Material: Aluminum
|
Application
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.48"
- Inner Dia: 1.12"
- Thickness: .062"
- Material: Fiber
|
Application
-
Borg Warner 9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
|
|
description Turbine Hub,10" 245mm Powerglide Spline |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Washer |
Specifications - Outer Dia: 2.86"
- Inner Dia: 1.69"
- Thickness: .06"
- Material: Steel
- 2 Lugs
|
Application
-
General Motors Powerglide
|
PART#: CW-2-1
Reference Part#: 3702744
|
description Washer,steel, 3 lugs |
Specifications - Material: Steel
- 3 External Tangs
|
Application
-
General Motors Powerglide
|
|
description Washer |
Specifications - Material: Steel
- 3 Internal Tabs
|
Application
-
General Motors TH180 (TH-180 Strasbourg, Tri-matic, GM-3, Corvair, Tempest)
|
|
description Washer |
Specifications |
Application
-
General Motors TH180 (TH-180 Strasbourg, Tri-matic, GM-3, Corvair, Tempest)
|
|
description Washer,HD |
Specifications - Outer Dia: 2.86"
- Inner Dia: 1.62"
- Thickness: .06"
- Material: Steel
- 2 Lugs
|
Application
-
General Motors Powerglide
|
|
description Washer,3 Tangs |
Specifications - Outer Dia: 2.56"
- Inner Dia: 1.8"
- Thickness: .08"
- Material: Bronze
|
Application
-
General Motors Powerglide
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Stator Cap |
Specifications - Outer Dia: 3.24"
- Inner Dia: 1.78"
- Material: Aluminum
|
Application
-
General Motors TH180 (TH-180 Strasbourg, Tri-matic, GM-3, Corvair, Tempest)
|
|
description Stator Cap,With Recess To Pilot CX-14 |
Specifications |
Application
-
General Motors TH180 (TH-180 Strasbourg, Tri-matic, GM-3, Corvair, Tempest)
|
|
description Washer |
Specifications - Material: Aluminum
- NOT FOR USE WITH BC-6HD BORG-WARNER SPRAG. COMPATIBLE WITH NTA-3446 BEARINGS AND TRA/TRB RACES. USE (2) VH-337 SNAP RINGS
|
Application
-
High Performance Miscellaneous/Multi-Purpose (HP)
|
|
description Stator Cap |
Specifications - Outer Dia: 3.22"
- Inner Dia: 1.87"
- Thickness: 0.47"
- Material: Aluminum
- Casting # 3831525, 6264946. Use With CW-3 Bronze Washer
|
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
General Motors Powerglide
|
|
description Washer |
Specifications - Outer Dia: 3.4"
- Inner Dia: 1.77"
|
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
General Motors Powerglide
|
|
description Washer |
Specifications - Outer Dia: 3.23"
- Inner Dia: 1.78"
|
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
General Motors Powerglide
-
General Motors Powerglide
|
|
description Washer |
Specifications - Material: Aluminum
- Functions with the diode. Chrysler and Powerglide cam adaptations. also for use with BC-6HD Borg Warner style sprag. Must be machined by user for the particular application.
|
Application
-
High Performance Opel (HP)
|
PART#: CW-9
Reference Part#: 3719262
|
description Turbine Washer |
Specifications - Outer Dia: 2.360"
- Inner Dia: 1.255"
- Material: Fiber
|
Application
-
General Motors Powerglide
|
PART#: CW-9-062
Reference Part#: CV-WF-062
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.28"
- Thickness: .062"
- Material: Fiber
|
Application
-
General Motors Powerglide
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.33"
- Material: Plastic
|
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.33"
- Material: Plastic
|
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Ford C-3, 10-1/4"
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
PART#: CW-9-3F
Reference Part#: FD-WF-125
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.33"
- Thickness: .125"
- Material: Fiber
|
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.25"
- Thickness: 0.14"
- Material: Fiber
|
Application
-
General Motors Powerglide
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.360"
- Inner Dia: 1.255"
- Thickness: 0.136"
- Material: Bronze
|
Application
-
General Motors Powerglide
|
PART#: CW-9F
Reference Part#: CV-WF-125
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.25"
- Thickness: 0.12"
- Material: Fiber
|
Application
-
General Motors Powerglide
|
|
description Washer,Hub |
Specifications |
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
|
PART#: FW-2-1
Reference Part#: FD-WS-2
|
description Washer,Standard |
Specifications - Thickness: .09"
- Material: Steel
|
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Ford C-5
-
Ford AOD (FIOD)
-
Ford AOD-E, 4R70W
-
Ford C-4, 10-1/4", 2 Speed
|
PART#: FW-2-1A
Reference Part#: FD-WS-3
|
description Washer,Oversized |
Specifications - Thickness: .11"
- Material: Steel
- Oversized
|
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Ford C-5
-
Ford AOD (FIOD)
-
Ford AOD-E, 4R70W
-
Ford C-4, 10-1/4", 2 Speed
|
|
description Washer |
Specifications - Outer Dia: 3.70"
- Inner Dia: 2.18"
- Thickness: .09"
- Material: Steel
- 2 Lugs
|
Application
-
Ford ATX Lockup & Non-Lockup
|
|
description Washer |
Specifications |
Application
|
|
description Washer,4 Lug Laser Cut Ring 5/16" Thick |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Washer,Bronze, 2 lugs, HD |
Specifications - Outer Dia: 2.91"
- Inner Dia: 1.8"
- Thickness: .080"
- Material: Bronze
|
Application
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner Bolted Aluminum, Industrial & Ford Passenger Applications
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
|
|
description Washer,2 Tangs |
Specifications - Outer Dia: 2.95"
- Inner Dia: 1.99"
- Material: Bronze
- .250" Long Tangs
|
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
|
description Washer,4 Tangs |
Specifications - Outer Dia: 2.95"
- Inner Dia: 1.99"
- Material: Bronze
|
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
|
description Washer |
Specifications - Outer Dia: 2.91"
- Inner Dia: 1.80"
- Thickness: .063"
- Material: Bronze
|
Application
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner Bolted Aluminum, Industrial & Ford Passenger Applications
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
|
|
description Stator Cap,Bearing Adapter |
Specifications - Outer Dia: 3.6"
- Inner Dia: 2"
|
Application
-
Ford AOD (FIOD)
-
Ford AOD-E, 4R70W
-
Ford E4OD
|
PART#: FW-4-17
Reference Part#: FD-WA-3
|
description Stator Cap |
Specifications - Outer Dia: 3.34"
- Inner Dia: 1.690"
- Thickness: 0.560"
- Material: Plastic
- Functional Thickness: 0.369". Use With Bearing SW-2-12
|
Application
-
Ford C-3, 10-1/4"
-
Ford C-4, 10-1/4", 2 Speed
|
PART#: FW-4-24
Reference Part#: FD-WA-9
|
description Stator Cap |
Specifications - Outer Dia: 3.35"
- Inner Dia: 1.7"
- Thickness: 0.355"
- Material: Aluminum
- Functional thickness 0.203". 3 notches
|
Application
-
Ford A4LD, 4R55E
-
Ford A4LD, 4R55E, Late
-
Ford A4LD Multi-Clutch 4.0
|
|
description Bearing Adapter Kit |
Specifications - Outer Dia: 3.35"
- Inner Dia: 1.7"
|
Application
-
Ford A4LD, 4R55E
-
Ford A4LD, 4R55E, Late
-
Ford A4LD Multi-Clutch 4.0
|
PART#: FW-4-3P
Reference Part#: FD-WP-AP
|
description Stator Cap |
Specifications - Outer Dia: 3.6"
- Inner Dia: 2.04"
- Thickness: 0.59"
- Material: Plastic
|
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Ford AOD (FIOD)
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
|
description Washer |
Specifications - Outer Dia: 3.78"
- Inner Dia: 2.03"
|
Application
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
PART#: FW-4-4A
Reference Part#: FD-WA-8
|
description Stator Cap |
Specifications - Outer Dia: 3.78"
- Inner Dia: 2.03"
- Thickness: 0.58"
- Material: Aluminum
|
Application
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
|
description Stator Cap,Rear |
Specifications - Material: Aluminum
- 4 Lugs (E1EP-7F435-BA)
|
Application
-
Ford ATX Lockup & Non-Lockup
|
|
description Stator Cap,Front, 3 Lugs |
Specifications - Outer Dia: 4.25"
- Inner Dia: 2.18"
- Material: Aluminum
- (E1EP-7F435-AA)
|
Application
-
Ford ATX Lockup & Non-Lockup
|
PART#: FW-4-7
Reference Part#: FD-WP1-OE
|
description Stator Cap |
Specifications - Outer Dia: 4"
- Inner Dia: 2.18"
- Thickness: 0.33"
- Material: Plastic
- Replaces FW-4-5 & FW-3-3 (E4EP-7937-AA)
|
Application
-
Ford ATX Lockup & Non-Lockup
|
|
description Washer |
Specifications - Outer Dia: 3.6"
- Inner Dia: 2"
- Thickness: 0.68"
|
Application
-
Ford C-5
-
Ford AOD (FIOD)
-
Ford AOD-E, 4R70W
-
Ford E4OD
-
Ford 4R100 4 Speed, RWD / 4 × 4
|
PART#: FW-9
Reference Part#: BW-WP3-OE
|
description Turbine Washer,Fiber |
Specifications - Outer Dia: 2.43"
- Inner Dia: 1.26"
- Thickness: .062"
- Material: Fiber
|
Application
-
Borg Warner Bolted Aluminum, Industrial & Ford Passenger Applications
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Chrysler Dodge Colt, Plymouth Arrow & Cricket & Japanese Chrysler, '74-'78
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.50"
- Inner Dia: 1.32"
- Thickness: .062"
- For fiber, Use FW-9-1F
|
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
|
|
description Turbine Washer,AOD-E |
Specifications - Outer Dia: 2.36"
- Inner Dia: 0.82"
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
PART#: FW-9-12B
Reference Part#: FD-WB-3B
|
description Turbine Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 0.82"
- Thickness: 0.070"
- Material: Bronze
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
PART#: FW-9-12C
Reference Part#: FD-WB-3C
|
description Turbine Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 0.82"
- Thickness: 0.080"
- Material: Bronze
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
|
description Turbine Washer,AOD-E |
Specifications - Outer Dia: 2.36"
- Inner Dia: 0.82"
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
PART#: FW-9-12D
Reference Part#: FD-WB-3D
|
description Turbine Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 0.82"
- Thickness: 0.088"
- Material: Bronze
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 0.82"
- Thickness: 0.098"
- Material: Bronze
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 0.82"
- Thickness: 0.108"
- Material: Bronze
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
|
description Kit,Turbine Washer, A4LD |
Specifications - Outer Dia: 2.36"
- Inner Dia: 0.82"
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.74"
- Inner Dia: 1.46"
- Thickness: .040"
- Material: Fiber
|
Application
|
PART#: FW-9-14
Reference Part#: FD-WA-17
|
description Turbine Washer |
Specifications - Outer Dia: 2.02"
- Inner Dia: 0.312"
- Thickness: 0.155"
- Material: Bronze
|
Application
-
Ford ATX Lockup & Non-Lockup
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 0.82"
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
|
description Turbine Washer,3 Lugs |
Specifications - Outer Dia: 2.36"
- Inner Dia: 1.15"
- Thickness: 0.04"
- Material: Bronze
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 1.15"
- Thickness: 0.098"
- Material: Bronze
- 3 Lugs (.280"). Contains a shim and FW-9-15D
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
|
description Turbine Washer,3 Lugs |
Specifications - Outer Dia: 2.36"
- Inner Dia: 1.15"
- Thickness: .108"
- Material: Bronze
- .280" Lugs
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
|
description Turbine Washer Kit,Cover, E4OD |
Specifications - Outer Dia: 2.36"
- Inner Dia: 1.15"
- Thickness: 0.098"
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
PART#: FW-9-16E
Reference Part#: FD-WB-4E
|
description Turbine Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 0.82"
- Thickness: .098"
- Material: Bronze
- .280" Lugs
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 0.82"
- Thickness: .108"
- Material: Bronze
- .280" Lugs
|
Application
-
Volkswagen / Audi VW 097, 098
-
Ford A4LD, 4R55E
-
Ford A4LD Multi-Clutch 4.0
-
Ford E4OD
|
PART#: FW-9-17
Reference Part#: FD-WP21-OE
|
description Turbine Washer,Vespel |
Specifications |
Application
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.50"
- Inner Dia: 1.32"
|
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.76"
- Inner Dia: 1.34"
- Thickness: .72"
- Material: Plastic
|
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Ford C-3, 10-1/4"
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
-
ZF ZF NON-LOCKUP
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.33"
- Material: Fiber
|
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Ford C-3, 10-1/4"
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
-
ZF ZF NON-LOCKUP
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.33"
|
Application
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Ford C-3, 10-1/4"
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
-
ZF ZF NON-LOCKUP
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.33"
- Thickness: .106"
- Material: Fiber
|
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Ford C-3, 10-1/4"
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
PART#: FW-9-4G
Reference Part#: FD-WF-188
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.33"
- Thickness: .188"
- Material: Plastic
|
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Ford C-3, 10-1/4"
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
PART#: FW-9-4GF
Reference Part#: FD-WF-188
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.33"
- Thickness: .188"
- Material: Fiber
|
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Ford C-3, 10-1/4"
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.33"
- Thickness: .045"
- Material: Plastic
|
Application
-
General Motors TH350 Chevrolet, TH250 (Vega)
-
Ford Cast Iron 3 Speed, FMX, AMC, Borg & Beck
-
Ford C-3, 10-1/4"
-
Ford C-4, 10-1/4", 2 Speed
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
|
description Washer,Cover |
Specifications |
Application
-
Ford C4, C6, 12" & C4 11-1/4", 2 Speed
|
PART#: FW-9-6
Reference Part#: FD-WB-2
|
description Turbine Washer |
Specifications |
Application
|
|
description Turbine Washer |
Specifications |
Application
|
|
description Turbine Washer |
Specifications |
Application
|
|
description Washer |
Specifications |
Application
-
Ford ATX Lockup & Non-Lockup
|
|
description Washer,Ring Gear |
Specifications |
Application
-
Ford ATX Lockup & Non-Lockup
|
PART#: FW-9-9
Reference Part#: FD5-WF-062
|
description Turbine Washer |
Specifications - Outer Dia: 3.2"
- Inner Dia: 1.06"
- Thickness: 0.062"
- Material: Plastic
|
Application
|
|
description Turbine Washer |
Specifications - Outer Dia: 3.2"
- Inner Dia: 1.06"
- Thickness: 0.68"
|
Application
|
|
description Turbine Washer |
Specifications - Outer Dia: 3.2"
- Inner Dia: 1.06"
- Thickness: 0.094"
- Material: Plastic
|
Application
|
|
description Thrust Plate,8 Holes |
Specifications - Outer Dia: 3.24"
- Inner Dia: 1.38"
- Thickness: .07"
|
Application
-
Mercedes 722.8 FWD, 7 Speed A-Class, B-CLASS
|
|
description Turbine Washer,Special Design |
Specifications - Outer Dia: 2.83"
- Inner Dia: 1.21"
- Thickness: .08"
- Material: Bronze
|
Application
-
Mercedes Fluid Coupling (Hydrak) & Torque Converter Parts
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.32"
- Inner Dia: 1.1"
- Thickness: 0.18"
- Material: Aluminum
|
Application
-
Mercedes Fluid Coupling (Hydrak) & Torque Converter Parts
|
|
description Thrust Washer |
Specifications - Outer Dia: 2.84"
- Inner Dia: 1.15"
- Thickness: .175"
- Material: Aluminum
- Casting #123-257-0552, 126-257-0552
|
Application
-
Mercedes Fluid Coupling (Hydrak) & Torque Converter Parts
-
Mercedes 722.4, 3.0L, W4A-020, MC-15
|
|
description Washer |
Specifications - Outer Dia: 2.46"
- Inner Dia: 1.54"
- Thickness: .09"
- Material: Steel
- 2 Lugs
|
Application
-
Jatco, Nissan & Other Japanese L3N71B, DA-5
-
Jatco, Nissan & Other Japanese F3A FWD, DA-7
-
Jatco, Nissan & Other Japanese Datsun/Mazda 8-7/8" (225mm) Dia., 9-3/8 (238mm Hollow/Solid Pilot)
|
PART#: JW-3
Reference Part#: MZ-WB-1
|
description Washer,Upgrade |
Specifications - Outer Dia: 2.81"
- Inner Dia: 1.99"
- Material: Bronze
|
Application
-
Mazda G4A, Ford 4EAT, DA-24
-
Subaru 4EAT
|
|
description Stator Cap |
Specifications - Outer Dia: 2.825"
- Inner Dia: 1.410"
- Thickness: .340"
- Material: Plastic
|
Application
-
Jatco, Nissan & Other Japanese L3N71B, DA-5
-
Jatco, Nissan & Other Japanese F3A FWD, DA-7
-
Jatco, Nissan & Other Japanese L4N71B, DA-8
-
Subaru Lockup And Non-Lockup (Antique), Smooth Impeller (SU-2...),Ribbed Impeller (SU-1), Centrifugal Clutch (SU-4/5/7/8)
-
Jatco, Nissan & Other Japanese Datsun/Mazda 8-7/8" (225mm) Dia., 9-3/8 (238mm Hollow/Solid Pilot)
|
|
description Stator Cap |
Specifications - Outer Dia: 3.8"
- Inner Dia: 1.65"
- Thickness: 0.243"
- Material: Plastic
|
Application
-
Jatco, Nissan & Other Japanese F3A, DA-12-TT
|
|
description Stator Cap |
Specifications |
Application
|
|
description Stator Cap |
Specifications |
Application
|
|
description Washer Kit |
Specifications - Outer Dia: 3.36"
- Inner Dia: 2.02"
|
Application
-
Mazda G4A-HL, DA-17
-
Mazda G4A, Ford 4EAT, DA-24
-
Subaru 4EAT
|
PART#: JW-4-13
Reference Part#: MZ-WA-3
|
description Stator Cap |
Specifications - Outer Dia: 3.97"
- Inner Dia: 2"
- Material: Aluminum
|
Application
-
Mazda G4A, Ford 4EAT, DA-16
|
|
description Washer,Bearing Adapter |
Specifications |
Application
-
Mazda G4A, Ford 4EAT, DA-16
|
PART#: JW-4-14
Reference Part#: MZ-WA-2
|
description Stator Cap,Front |
Specifications - Outer Dia: 3.81"
- Inner Dia: 1.66"
- Thickness: .27"
- Material: Aluminum
|
Application
-
Mazda G4A, Ford 4EAT, DA-15,15L/S
-
Mazda 4EAT-G
|
PART#: JW-4-19
Reference Part#: MZ-WA-6
|
description Stator Cap |
Specifications - Outer Dia: 3.36"
- Inner Dia: 2.02"
- Material: Aluminum
- To Adapt To JW-3 Bronze Washer
|
Application
-
Mazda G4A-HL, DA-17
-
Mazda G4A, Ford 4EAT, DA-24
-
Subaru 4EAT
|
PART#: JW-4-23
Reference Part#: MI-WA-1
|
description Stator Cap |
Specifications - Outer Dia: 3.065"
- Inner Dia: 1.690"
- Thickness: 0.610"
- Material: Aluminum
- Bearing: TW-2-4
|
Application
-
Industrial Jatco, Industrial
|
|
description Stator Cap |
Specifications - Material: Aluminum
- .51" assembled Height , Use With Bearing 35400C
|
Application
-
Jatco, Nissan & Other Japanese RL4F02A, DA-11
|
PART#: JW-4-25
Reference Part#: NI-WA-3
|
description Stator Cap |
Specifications - Outer Dia: 3.38"
- Inner Dia: 1.61"
- Thickness: 0.35"
- Material: Aluminum
- OE Replacement
|
Application
-
Jatco, Nissan & Other Japanese RE4R03A, DA-31, 250mm
|
PART#: JW-4-28
Reference Part#: MZ-WA-13
|
description Stator Cap |
Specifications - Use with JW-3 or use bearing 35400C with turb hub JX-13-42HT
|
Application
-
Mazda G4A, Ford 4EAT, DA-16
|
|
description Stator Cap |
Specifications - Outer Dia: 2.83"
- Inner Dia: 1.42"
- Thickness: .35"
- Material: Phenolic or Aluminum
|
Application
-
Jatco, Nissan & Other Japanese L3N71B, DA-5
-
Jatco, Nissan & Other Japanese F3A FWD, DA-7
-
Jatco, Nissan & Other Japanese L4N71B, DA-8
-
Subaru Lockup And Non-Lockup (Antique), Smooth Impeller (SU-2...),Ribbed Impeller (SU-1), Centrifugal Clutch (SU-4/5/7/8)
-
Jatco, Nissan & Other Japanese Datsun/Mazda 8-7/8" (225mm) Dia., 9-3/8 (238mm Hollow/Solid Pilot)
|
|
description Stator Cap |
Specifications - Outer Dia: 2.92"
- Inner Dia: 1.56"
- Material: Aluminum
- Replaces Plastic
|
Application
-
Jatco, Nissan & Other Japanese RL3F01A, DA-6; RL4F02A, DA-13
-
Subaru Lockup And Non-Lockup (Antique), Smooth Impeller (SU-2...),Ribbed Impeller (SU-1), Centrifugal Clutch (SU-4/5/7/8)
|
|
description Turbine Washer |
Specifications - Outer Dia: 1.46"
- Inner Dia: .87"
- Thickness: .10"
- Material: Plastic
|
Application
-
Jatco, Nissan & Other Japanese F3A FWD, DA-7
-
Jatco, Nissan & Other Japanese Datsun/Mazda 8-7/8" (225mm) Dia., 9-3/8 (238mm Hollow/Solid Pilot)
|
PART#: JW-9-10
Reference Part#: MZ-WF-1
|
description Washer |
Specifications - Outer Dia: 2.25"
- Inner Dia: 1.37"
- Thickness: .250"
- Material: Phenolic
|
Application
-
Mazda G4A-EL, Late, DA-29, DA-34
-
Mazda G4A, Ford 4EAT, DA-24
|
|
description Washer |
Specifications - Outer Dia: 2.25"
- Inner Dia: 1.37"
- Thickness: .250"
- Material: Bronze
|
Application
-
Mazda G4A-EL, Late, DA-29, DA-34
-
Mazda G4A, Ford 4EAT, DA-24
|
|
description Turbine Washer |
Specifications - Material: Metal (Replaces Plastic)
|
Application
-
Jatco, Nissan & Other Japanese F3A, DA-12-TT
|
PART#: JW-9-12
Reference Part#: JA-WB-2
|
description Turbine Washer |
Specifications |
Application
-
Jatco, Nissan & Other Japanese RL4F03A, DA-28
|
|
description Turbine Washer |
Specifications |
Application
-
Jatco, Nissan & Other Japanese Nissan Micra, DA-35
|
|
description Washer |
Specifications - Outer Dia: 2.05"
- Inner Dia: 1.20"
- Thickness: .250"
|
Application
-
Mazda G4A, Ford 4EAT, DA-24
|
PART#: JW-9-15
Reference Part#: JA-WB-3
|
description Turbine Washer |
Specifications - Outer Dia: 1.650"
- Inner Dia: 1.060"
- Thickness: 0170"
- Material: Bronze
|
Application
-
Jatco, Nissan & Other Japanese JF011E (RE0F10A) Nissan
|
|
description Turbine Washer |
Specifications - Material: Metal (Replaces Plastic)
|
Application
-
Jatco, Nissan & Other Japanese RL4F02A, DA-11
-
Jatco, Nissan & Other Japanese RE4R01A, DA-18, DA-48
-
Jatco, Nissan & Other Japanese L3N71B, DA-5
-
Jatco, Nissan & Other Japanese JF403, DA-20
-
Jatco, Nissan & Other Japanese RG4R01A, DA-25
|
|
description Turbine Washer |
Specifications - Outer Dia: 1.60"
- Inner Dia: .87"
- Thickness: .15"
- Material: Metal (Replaces Plastic
|
Application
-
Jatco, Nissan & Other Japanese RL3F01A, DA-6; RL4F02A, DA-13
-
Jatco, Nissan & Other Japanese L4N71B, DA-8
-
Jatco, Nissan & Other Japanese R4A-EL, DA-8-20
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.52"
- Inner Dia: 1.10"
- Thickness: .16"
- Material: Bronze
|
Application
-
Jatco, Nissan & Other Japanese RN3F01A, DA-10
|
|
description Outer Pump Gear |
Specifications |
Application
-
Ford Cruisomatic, Fordomatic,Iron Case & 3-Speed, BW 8 & 12
-
Borg Warner 8 & 12
-
Ford C6
-
Ford 3 Speed (Cast Iron)
-
Ford FMX
|
|
description Shim |
Specifications - Outer Dia: 2.855"
- Inner Dia: 1.7"
- Thickness: 0.175"
|
Application
-
Chrysler Miscellaneous/Multi-Purpose (Chrysler)
-
Ford Miscellaneous/Multi-Purpose (Ford)
-
General Motors Miscellaneous/Multi-Purpose (GM)
|
|
description Shim |
Specifications |
Application
-
Chrysler Miscellaneous/Multi-Purpose (Chrysler)
-
Ford Miscellaneous/Multi-Purpose (Ford)
-
General Motors Miscellaneous/Multi-Purpose (GM)
|
|
description Shim |
Specifications - Outer Dia: 4.125"
- Inner Dia: 3.250"
- Thickness: 0.034"
|
Application
-
Chrysler Miscellaneous/Multi-Purpose (Chrysler)
-
Ford Miscellaneous/Multi-Purpose (Ford)
-
General Motors Miscellaneous/Multi-Purpose (GM)
|
|
description Roller Repair Kit |
Specifications - For NW-2-1,18 Rollers, 5mm x 8.7mm
|
Application
-
Honda / Acura Honda Lockup
|
|
description Roller Repair Kit |
Specifications - For NW-2-2, 24 Rollers, 4.5mm x 8.7mm
|
Application
-
Honda / Acura Honda Lockup
|
PART#: NW-4-1
Reference Part#: HO-WB-2
|
description Washer,Thrust Surface |
Specifications - Outer Dia: 2.590"
- Inner Dia: 1.380"
- Thickness: 0.230"
- Material: Bronze
|
Application
-
Honda / Acura Honda Lockup
|
PART#: PW-9-062
Reference Part#: FS-WF-062
|
description Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 1.34"
- Material: Fiber
|
Application
|
PART#: PW-9-094
Reference Part#: FS-WF-094
|
description Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 1.34"
- Material: Fiber
|
Application
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.74"
- Inner Dia: 1.45"
- Thickness: .12"
- Material: Fiber
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
|
PART#: PW-9-2D
Reference Part#: FS-WP4-OE
|
description Turbine Washer |
Specifications - Outer Dia: 2.3"
- Inner Dia: 1.4"
- Thickness: .225"
- Material: Plastic
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
-
ZF ZF4HP22, BM-25, BMW & BM-27, '90 Jaguar
|
PART#: PW-9-2F
Reference Part#: FS-WP6-OE
|
description Turbine Washer |
Specifications - Outer Dia: 2.3"
- Inner Dia: 1.4"
- Thickness: .248"
- Material: Plastic
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
-
ZF ZF4HP22, BM-25, BMW & BM-27, '90 Jaguar
|
|
description Washer,Bronze |
Specifications - Outer Dia: 2.3"
- Inner Dia: 1.4"
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
-
ZF ZF4HP22, BM-25, BMW & BM-27, '90 Jaguar
|
PART#: PW-9-3F
Reference Part#: FS-WP3-OE
|
description Turbine Washer |
Specifications - Outer Dia: 2.291"
- Inner Dia: 1.264"
- Thickness: .248"
- Material: Plastic
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
-
ZF ZF4HP24
-
ZF BMW (BABY, 318) 254mm, BM-12
-
ZF ZF4HP18
|
|
description Washer,Bronze |
Specifications - Outer Dia: 2.291"
- Inner Dia: 1.264"
|
Application
-
ZF ZF4HP22 & Chrysler Jeep A999
-
ZF ZF4HP24
-
ZF BMW (BABY, 318) 254mm, BM-12
-
ZF ZF4HP18
|
PART#: RW-9-1
Reference Part#: RE-WP2-OE
|
description Washer |
Specifications - Outer Dia: 2.40"
- Inner Dia: 1.45"
- Thickness: .038"
- Material: Plastic
|
Application
-
Renault, Peugeot Renault (DPO), Peugeot (AL4), Early
-
Renault, Peugeot Renault (DPO), Peugeot (AL4), Late
|
|
description Washer,Hub Bearing Adapter |
Specifications - Use With SH-1-26GRC to Accept SW-2-14 Bearing
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
-
Industrial Borg Warner Industrial 310 mm, Lockup & Non-Lockup
-
Chrysler 310mm Lockup, 47RH, 48RE, A-618
|
|
description Damper Part,Nylon Washer Valve, Diesel (Damper To Pressure Plate) |
Specifications |
Application
-
General Motors 245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
|
|
description Washer,Flanged |
Specifications - Outer Dia: 2"
- Inner Dia: 1.43"
- Thickness: .030"
- Material: Steel
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
|
PART#: SW-2-9HD
Reference Part#: GM-N-10H
|
description Plate,Heavy Duty |
Specifications - Outer Dia: 3.00"
- Inner Dia: 1.756"
- Thickness: 0.063"
- Material: Hardened Steel
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
|
PART#: SW-3
Reference Part#: 1165990
|
description Washer,converter sun gear |
Specifications - Outer Dia: 2.55"
- Inner Dia: 1.73"
- Material: Bronze
- 3 Tang
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors Buick Dynaflow
|
PART#: SW-4-13
Reference Part#: GM-WA-7
|
description Stator Cap,Front |
Specifications - Outer Dia: 4.25"
- Inner Dia: 2"
- Material: Aluminum
- 8653854
|
Application
-
General Motors 310mm Lockup, 4L80E Single Stator and Dual Stator
|
PART#: SW-4-20
Reference Part#: GM-WA-13
|
description Stator Cap |
Specifications - Outer Dia: 4.01"
- Inner Dia: 1.80"
- Thickness: .25"
- Material: Aluminum
|
Application
-
General Motors 228mm Saturn
|
|
description Washer Kit,Buick TH350 |
Specifications - Outer Dia: 3.86"
- Inner Dia: 1.72"
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
|
|
description Washer,Plastic |
Specifications - Outer Dia: 3.75"
- Inner Dia: 2-5/8"
|
Application
-
General Motors TH200
-
General Motors 254mm, TH125, Non-Lockup
|
|
description Washer |
Specifications - Outer Dia: 3.75"
- Inner Dia: 2-5/8"
|
Application
-
General Motors TH200
-
General Motors 254mm, TH125, Non-Lockup
|
PART#: SW-4-6
Reference Part#: GM-WP-1
|
description Washer |
Specifications - Outer Dia: 3.64"
- Inner Dia: 1.58"
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
-
General Motors 245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
|
|
description Stator Cap |
Specifications - Outer Dia: 3.64"
- Inner Dia: 1.58"
- Thickness: 0.24"
- Material: Plastic
|
Application
-
General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E
-
General Motors 245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
|
PART#: SW-4-9
Reference Part#: GM-WA-4
|
description Stator Cap |
Specifications - Outer Dia: 3.65"
- Inner Dia: 1.93"
- Thickness: 0.22"
- Material: Aluminum
- Use With SW-2-11 Bearing. OE# 8636120
|
Application
-
General Motors 245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
|
|
description Turbine Washer |
Specifications - Outer Dia: 3.24"
- Inner Dia: 1.45"
- Thickness: .080"
- Material: Bronze (Replaces Vespel®)
|
Application
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.750"
- Inner Dia: 1.450"
- Thickness: .132"
- Material: Plastic
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
|
|
description Thrust Plate, ,Alum.,Blank |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.46"
- Thickness: .205"
- Material: Fiber
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
|
PART#: SW-9-19
Reference Part#: GMFD-WP-1
|
description Turbine Washer,8 Outer Notches |
Specifications - Outer Dia: 1.484"
- Inner Dia: 1.010"
- Thickness: 0.136"
- Material: Plastic
|
Application
-
Aisin-Warner AISIN AW TF-80SC
-
Ford 6F50/6F55
-
General Motors 6T70 / 6T75
-
Aisin-Warner TF-81SC (Ford AF21)
-
Kia A6GF1
|
PART#: SW-9-20
Reference Part#: GMFD-WP-2
|
description Turbine Washer,8 Outer Notches |
Specifications - Outer Dia: 1.484"
- Inner Dia: 1.010"
- Thickness: 0.136"
- Material: Vespel®
|
Application
-
Aisin-Warner AISIN AW TF-80SC
-
Ford 6F50/6F55
-
General Motors 6T70 / 6T75
-
Aisin-Warner TF-81SC (Ford AF21)
-
Kia A6GF1
|
PART#: SW-9-25
Reference Part#: AL-WF-1
|
description Turbine Washer,Allison 1000 Late |
Specifications - Outer Dia: 2.445"
- Inner Dia: 1.375"
- Thickness: 0.235"
- Material: Fiber
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.45"
- Thickness: 0.146
- Material: Fiber
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
|
|
description Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.45"
- Thickness: .160"
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.445"
- Inner Dia: 1.315"
- Thickness: 0.175"
- Material: Plastic
|
Application
-
General Motors 254mm, TH125, Non-Lockup
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.445"
- Inner Dia: 1.315"
- Thickness: 0.197"
- Material: Plastic
|
Application
-
General Motors 254mm, TH125, Non-Lockup
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.445"
- Inner Dia: 1.315"
- Thickness: 0.220"
- Material: Plastic
|
Application
-
General Motors 254mm, TH125, Non-Lockup
|
PART#: TW-2
Reference Part#: CH-WS-1
|
description Washer,Wear-Plate |
Specifications - Material: Steel
- .22" Wide Lugs
|
Application
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Washer |
Specifications - Material: Steel
- .43" Wide Lugs
|
Application
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
|
PART#: TW-2-2
Reference Part#: CH-WS-12
|
description Washer,Wear-Plate |
Specifications |
Application
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Washer |
Specifications |
Application
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
PART#: TW-2-3
Reference Part#: CH-WS-2
|
description Washer,Wear-Plate |
Specifications |
Application
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
-
Chrysler 9-1/2" Lockup, A-470, A-670, A-604, FWD
|
|
description Washer |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Washer,Steel |
Specifications |
Application
-
Chrysler Dodge Colt, Plymouth Arrow & Cricket & Japanese Chrysler, '74-'78
|
|
description Washer |
Specifications - Outer Dia: 2.8"
- Inner Dia: 1.6"
- Material: Bronze
- 3 Lugs
|
Application
-
Borg Warner 11" Industrial
-
Industrial Borg Warner Industrial 310 mm, Lockup & Non-Lockup
-
Chrysler 68RFE, 6.7L Cummins Diesel
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Washer,4 Lugs |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.81"
- Thickness: .06"
- Material: Bronze
- .30" Wide Lugs
|
Application
-
Industrial Chrysler, Industrial
-
Chrysler TF-8 (Iron) 1956-'61, Powerflite 1953-'61, Industrial & Passenger ('52-'54) (1539589)
|
|
description Washer |
Specifications - Outer Dia: 2.32"
- Inner Dia: 1.44"
- Material: Bronze
|
Application
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
-
Chrysler 10" 254mm Lockup, A-606, FWD
|
|
description Washer,3 Lugs |
Specifications - Outer Dia: 3.2"
- Inner Dia: 1.92"
- Material: Bronze
- 3 Lugs
|
Application
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
|
PART#: TW-3-3
Reference Part#: CH-WB-1
|
description Washer |
Specifications - Outer Dia: 2.94"
- Inner Dia: 1.96"
- Thickness: .06"
- Material: Bronze
- 4 Lugs
|
Application
-
Borg Warner 11" Industrial
-
Industrial Borg Warner Industrial 310 mm, Lockup & Non-Lockup
-
Chrysler 68RFE, 6.7L Cummins Diesel
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Washer |
Specifications - Outer Dia: 2.94"
- Inner Dia: 1.96"
|
Application
-
Borg Warner 11" Industrial
-
Industrial Borg Warner Industrial 310 mm, Lockup & Non-Lockup
-
Chrysler 68RFE, 6.7L Cummins Diesel
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Washer |
Specifications - Outer Dia: 2.94"
- Inner Dia: 1.96"
- Material: Bronze
|
Application
-
Borg Warner 11" Industrial
-
Industrial Borg Warner Industrial 310 mm, Lockup & Non-Lockup
-
Chrysler 68RFE, 6.7L Cummins Diesel
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Washer |
Specifications - Outer Dia: 2.94"
- Inner Dia: 1.96"
|
Application
-
Borg Warner 11" Industrial
-
Industrial Borg Warner Industrial 310 mm, Lockup & Non-Lockup
-
Chrysler 68RFE, 6.7L Cummins Diesel
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Washer,Stator, 2 Lugs, External |
Specifications - Outer Dia: 2.86"
- Inner Dia: 1.83"
- Material: Bronze
|
Application
-
Mitsubishi KM-175-5, KM-177 Lockup, CT-12
-
Mitsubishi KM-175-5, KM-177 Lockup, F4A43, CT-12-1, CT- 18, Late
-
Mitsubishi KM-175 Lockup, CT-7, CT-9
-
Mitsubishi KM-176 Lockup, CT-11
|
PART#: TW-3-7
Reference Part#: CH-WB-2
|
description Washer |
Specifications - Outer Dia: 2.41"
- Inner Dia: 1.44"
- Thickness: .060"
- Material: Bronze
- Tabs width.190"
|
Application
-
Chrysler 10-3/4" Lockup, Late, A-500, A-518, RWD
-
Chrysler 10" 41TE & 42LE
|
|
description Washer |
Specifications - Outer Dia: 2.41"
- Inner Dia: 1.44"
- Thickness: .080"
- Material: Bronze
- Tabs width.190"
|
Application
-
Chrysler 10-3/4" Lockup, Late, A-500, A-518, RWD
-
Chrysler 10" 41TE & 42LE
|
|
description Washer,Replaced By TW-3-10 |
Specifications - Outer Dia: 2.32"
- Inner Dia: 1.44"
- Thickness: 0.03"
- Material: Bronze
|
Application
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
-
Chrysler 10" 254mm Lockup, A-606, FWD
|
PART#: TW-3-9
Reference Part#: CH-WB-3
|
description Washer,Wide Tang, Heavy Duty |
Specifications - Outer Dia: 2.41"
- Inner Dia: 1.44"
- Material: Bronze
|
Application
-
Chrysler 10-3/4" Lockup, Late, A-500, A-518, RWD
|
|
description Stator Cap,4 Lugs |
Specifications - Outer Dia: 3.24"
- Inner Dia: 1.38"
- Thickness: 0.33"
- Material: Plastic
|
Application
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Washer |
Specifications - Outer Dia: 3.65"
- Inner Dia: 1.48"
- Thickness: 0.35"
|
Application
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
|
PART#: TW-4-11
Reference Part#: CH-WS-11
|
description Washer,Wear Plate, Square Hole |
Specifications |
Application
-
Chrysler 10-3/4" Lockup, Late, A-500, A-518, RWD
|
PART#: TW-4-11A
Reference Part#: CH-WS-14
|
description Washer,Wear Plate, Square Hole |
Specifications |
Application
-
Chrysler 10-3/4" Lockup, Late, A-500, A-518, RWD
|
|
description Washer |
Specifications - Outer Dia: 2.600"
- Inner Dia: 1.310"
- Material: Aluminum
|
Application
-
Mitsubishi KM-175-5, KM-177 Lockup, CT-12
-
Mitsubishi KM-175 Lockup, CT-7, CT-9
-
Mitsubishi KM-176 Lockup, CT-11
|
PART#: TW-4-16
Reference Part#: CH-WP7-OE
|
description Stator Cap,Phenolic |
Specifications |
Application
-
Chrysler 10-3/4" Lockup, Late, A-500, A-518, RWD
|
|
description Washer |
Specifications - Outer Dia: 3.38"
- Inner Dia: 1.48"
|
Application
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Stator Cap |
Specifications - Outer Dia: 2.595"
- Inner Dia: 1.300"
- Thickness: .260"
- Material: Aluminum
|
Application
-
Mitsubishi KM-170 Non-Lockup, CT-5
-
Mitsubishi KM 175 & 177 Non-Lockup, CT-9
|
PART#: TW-4-6
Reference Part#: MT-WA-175
|
description Stator Cap |
Specifications - Outer Dia: 2.6"
- Inner Dia: 1.3"
- Material: Aluminum
|
Application
-
Mitsubishi KM-175-5, KM-177 Lockup, CT-12
-
Mitsubishi KM-175 Lockup, CT-7, CT-9
-
Mitsubishi KM-176 Lockup, CT-11
|
|
description Washer |
Specifications - Outer Dia: 3.22"
- Inner Dia: 1.88"
- Material: Aluminum
|
Application
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Turbine Washer |
Specifications - Outer Dia: 1.93"
- Inner Dia: 0.094"
- Material: Fiber
|
Application
-
Mitsubishi KM-170 Non-Lockup, CT-5
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.74"
- Inner Dia: 1.4"
- Thickness: 0.13"
- Material: Fiber
|
Application
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
|
PART#: TW-9-15
Reference Part#: CH-WF-1
|
description Turbine Washer |
Specifications - Outer Dia: 2.375"
- Inner Dia: 1.070"
- Thickness: 0.136"
- Material: Fiber
|
Application
-
Chrysler 62TE
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
-
Chrysler 9-1/2" Lockup, A-470, A-670, A-604, FWD
-
Chrysler 10" 41TE & 42LE
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.360"
- Inner Dia: 1.075"
- Thickness: 0.138"
- Material: Bronze
|
Application
-
Chrysler 62TE
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
-
Chrysler 9-1/2" Lockup, A-470, A-670, A-604, FWD
-
Chrysler 10" 41TE & 42LE
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 1.08"
- Thickness: 0.12"
- Material: Plastic
- OEM
|
Application
-
Chrysler 62TE
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
-
Chrysler 9-1/2" Lockup, A-470, A-670, A-604, FWD
-
Chrysler 10" 41TE & 42LE
|
|
description Turbine Washer,OEM |
Specifications - Outer Dia: 2.36"
- Inner Dia: 1.08"
- Thickness: 0.136"
- Material: Fiber
|
Application
-
Chrysler 62TE
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
-
Chrysler 9-1/2" Lockup, A-470, A-670, A-604, FWD
-
Chrysler 10" 41TE & 42LE
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.35
- Inner Dia: 1.40"
|
Application
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
PART#: TW-9-21
Reference Part#: CH-WF-3
|
description Washer |
Specifications - Outer Dia: 2.56"
- Inner Dia: 1.39"
- Material: Vulcanized Fiber.
- Replaces Bearing TW-9-8
|
Application
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 10" 41TE & 42LE
|
|
description Washer,Plastic |
Specifications - Outer Dia: 2.350"
- Inner Dia: 1.538"
- Thickness: 0.185"
- Material: Phenolic
|
Application
-
Chrysler 10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
|
PART#: TW-9-23B
Reference Part#: CH-WP2-OE
|
description Turbine Washer,Plastic |
Specifications - Outer Dia: 2.76"
- Inner Dia: .69"
|
Application
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.26"
- Inner Dia: 1.51"
- Material: Bimetal
|
Application
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.750"
- Inner Dia: 1.450"
- Thickness: .083"
- Material: Plastic
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
|
PART#: TW-9-5BF
Reference Part#: GM-WF-094
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.45"
- Thickness: .094"
- Material: Fiber
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.45"
- Thickness: .130"
- Material: Plastic
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
|
PART#: TW-9-5CF
Reference Part#: GM-WF-125
|
description Turbine Washer |
Specifications - Outer Dia: 2.75"
- Inner Dia: 1.45"
- Material: Fiber
|
Application
-
General Motors TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
-
General Motors TH400 3L80, Allison AT540, 310mm
-
Allison AT540, 310mm, TH400 3L80
-
Chrysler 10-3/4" Non-Lockup, TF-6 A-904 & TF-8 A-727, RWD
-
Chrysler 11-3/4" Non-Lockup, TF-8 A-727, RWD
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.12"
- Inner Dia: 1.26"
- Thickness: .14"
- Material: Fiber
|
Application
-
General Motors TH180 (TH-180 Strasbourg, Tri-matic, GM-3, Corvair, Tempest)
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
-
Ford Jatco, Granada & Monarch '77-Up
|
PART#: TW-9-7AF
Reference Part#: CH-WF-125
|
description Turbine Washer |
Specifications - Outer Dia: 2.42"
- Inner Dia: 1.18"
- Material: Fiber
|
Application
-
General Motors TH180 (TH-180 Strasbourg, Tri-matic, GM-3, Corvair, Tempest)
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
-
Ford Jatco, Granada & Monarch '77-Up
|
PART#: TW-9-7CF
Reference Part#: CH-WF-062
|
description Turbine Washer |
Specifications - Outer Dia: 2.42"
- Inner Dia: 1.18"
- Material: Fiber
|
Application
-
General Motors TH180 (TH-180 Strasbourg, Tri-matic, GM-3, Corvair, Tempest)
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
-
Ford Jatco, Granada & Monarch '77-Up
|
PART#: TW-9-7DF
Reference Part#: CH-WF-094
|
description Turbine Washer |
Specifications - Outer Dia: 2.42"
- Inner Dia: 1.18"
- Thickness: .094"
- Material: Fiber
|
Application
-
General Motors TH180 (TH-180 Strasbourg, Tri-matic, GM-3, Corvair, Tempest)
-
Chrysler 9-1/2" Non-Lockup, A-404, FWD
-
Ford Jatco, Granada & Monarch '77-Up
|
|
description Washer |
Specifications |
Application
-
Volkswagen / Audi VW 010
-
ZF Volkswagen & Audi Fully Automatic (Antique)
|
|
description Washer,Steel |
Specifications |
Application
-
ZF Volkswagen Stick Auto (Antique)
|
|
description Washer,Thrust, Steel |
Specifications |
Application
-
ZF NSU with 138 Tooth Ring Gear (Antique)
|
|
description Washer,3 Tangs |
Specifications - Outer Dia: 2.56"
- Inner Dia: 1.75"
- Thickness: .05"
- Material: Bronze
|
Application
-
Volkswagen / Audi VW 010
-
Volkswagen / Audi VW 010
-
ZF Volkswagen & Audi Fully Automatic (Antique)
|
|
description Washer |
Specifications - Outer Dia: 2.56"
- Inner Dia: 1.75"
- Thickness: .08"
- Material: Bronze
- 3 Lugs
|
Application
|
|
description Washer |
Specifications - Outer Dia: 3.15"
- Inner Dia: 1.56"
- Material: Bronze
|
Application
-
Volkswagen / Audi VW 010
-
ZF Volkswagen & Audi Fully Automatic (Antique)
|
|
description Washer |
Specifications - Outer Dia: 1.74"
- Inner Dia: .65"
- Thickness: .08"
- Material: Bronze
|
Application
-
Volkswagen / Audi VW 010
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
-
ZF Volkswagen & Audi Fully Automatic (Antique)
|
|
description Washer,Replaces Triangle |
Specifications - Outer Dia: 1.735"
- Inner Dia: 0.650"
- Thickness: 0.080"
- Material: Bronze
|
Application
-
Volkswagen / Audi VW 010
-
ZF Volkswagen & Audi Fully Automatic (Antique)
|
|
description Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 1.33"
- Material: Plastic
|
Application
-
ZF Volkswagen Stick Auto (Antique)
|
|
description Washer |
Specifications - Outer Dia: 3.00"
- Inner Dia: 1.64"
- Thickness: .043"
- Material: Steel
- 2 Lugs
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
PART#: WW-2-1
Reference Part#: BW-WS-2
|
description Washer |
Specifications - Outer Dia: 3.06"
- Inner Dia: 1.87"
- Thickness: .05"
- Material: Steel
- 6 Tangs
|
Application
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 11" Industrial
-
Borg Warner 11" Industrial
-
Borg Warner D.G. With Direct Drive Clutch 11" (279mm Dia.)
|
|
description Washer,Wear-Plate |
Specifications |
Application
-
Borg Warner D.G. With Direct Drive Clutch 11" (279mm Dia.)
|
PART#: WW-2-3
Reference Part#: BW-WS-3
|
description Washer,Wear-Plate |
Specifications - Outer Dia: 3.00"
- Inner Dia: 1.87"
- Thickness: .043"
- Material: Steel
- 2 Lugs
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 11" Industrial
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Washer |
Specifications - Material: Steel
- Squared O.D.
|
Application
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
-
ZF ZF3HP22 NON-LOCKUP
|
PART#: WW-2-5
Reference Part#: BW-WS-1
|
description Washer,Wear-Plate, Oval |
Specifications - Inner Dia: 1.87"
- Thickness: .045"
- Length: 3.41"
- Material: Steel
|
Application
-
Borg Warner 11" Industrial
|
|
description Washer,Wear-Plate, Oval |
Specifications - Inner Dia: 1.87"
- Thickness: .063"
- Length: 3.41"
- Material: Steel
|
Application
-
Borg Warner 11" Industrial
|
|
description Thrust Washer |
Specifications - Outer Dia: 2.90"
- Inner Dia: 1.75"
- Thickness: .06"
- Material: Bronze On Steel
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
-
Borg Warner 11" Industrial
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
-
Borg Warner D.G. With Direct Drive Clutch 11" (279mm Dia.)
|
|
description Washer |
Specifications |
Application
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Stator Cap |
Specifications - Outer Dia: 3.19"
- Inner Dia: 1.8"
- Material: Aluminum
- Use With FW-3
|
Application
-
Borg Warner 11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
|
|
description Thrust Plate |
Specifications - Outer Dia: 3.19"
- Inner Dia: 1.94"
- Material: Aluminum
|
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Stator Cap,Needle Bearing Type |
Specifications - Outer Dia: 3.22"
- Inner Dia: 1.55"
- Thickness: .36"
- Material: Aluminum
|
Application
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Turbine Washer |
Specifications - Outer Dia: 1.810"
- Inner Dia: 0.875"
- Thickness: 0.062"
- Material: Fiber
|
Application
-
Volkswagen / Audi VW 010
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
-
ZF Volkswagen & Audi Fully Automatic (Antique)
|
PART#: WW-9-3BF
Reference Part#: BW35-WF-094
|
description Turbine Washer |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.98"
- Inner Dia: 2.07"
- Thickness: .068".
- Material: Steel, Bronze Plated
|
Application
-
Borg Warner 11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar
|
|
description Plate,Repair |
Specifications - Outer Dia: 2-1/4"
- Inner Dia: 1.26"
- Thickness: 3/32"
- Material: Steel
|
Application
-
Borg Warner 11" Except U.S.A.,Type 2, Models 8, 12 & 35, 65, 66
-
Borg Warner 11" Industrial
|
|
description Washer,Thrust |
Specifications |
Application
-
Miscellaneous/General Purpose Misc Unlisted
|
PART#: YW-4-4
Reference Part#: TO-WA-15
|
description Stator Cap,Front, Bulletproof™ |
Specifications - Outer Dia: 3.09"
- Inner Dia: 1.32"
- Thickness: .55"
- Material: Aluminum
|
Application
-
Toyota A40D/A43D/A44D Non-Lockup, Overdrive
|
PART#: YW-4-5
Reference Part#: TO-WA-1
|
description Stator Cap,Bulletproof™ |
Specifications - Outer Dia: 3.09"
- Inner Dia: 1.28"
- Thickness: .41"
- Material: Aluminum
|
Application
-
Toyota A-41, A-42DL Non-Lockup
-
Toyota A-41, A-42DL Non-Lockup
-
Toyota A-42/43/44/45 DE/DL Lockup
-
Toyota A-42/43/44/45 DE/DL Lockup
-
Toyota A-130 Non-Lockup, MX-17
|
|
description Stator Cap,Rear, Bulletproof™ |
Specifications - Outer Dia: 2.68"
- Inner Dia: 1.28"
- Thickness: .37"
- Material: Aluminum
|
Application
|
|
description Washer |
Specifications - Outer Dia: 1.68"
- Inner Dia: 1.02"
- Material: Fiber
|
Application
-
Toyota 2 & 3 Speed, Corrola 8-1/2" (241mm)/Corona 9-3/4" (248mm), '65-'76
|
|
description Turbine Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 1.19"
- Thickness: .137"
- Material: Bronze
|
Application
-
Toyota A-41, A-42DL Non-Lockup
-
Toyota A-42/43/44/45 DE/DL Lockup
-
Toyota A-130 Non-Lockup, MX-17
-
Toyota A40D/A43D/A44D Non-Lockup, Overdrive
|
PART#: YW-9-2B
Reference Part#: TO-WB-3
|
description Turbine Washer |
Specifications - Outer Dia: 2.36"
- Inner Dia: 1.19"
|
Application
-
Toyota A-41, A-42DL Non-Lockup
-
Toyota A-42/43/44/45 DE/DL Lockup
-
Toyota A-130 Non-Lockup, MX-17
-
Toyota A40D/A43D/A44D Non-Lockup, Overdrive
|
|
description Washer,Special |
Specifications - Outer Dia: 2.03"
- Inner Dia: 1.31"
|
Application
-
Toyota 2 & 3 Speed, Corrola 8-1/2" (241mm)/Corona 9-3/4" (248mm), '65-'76
-
Borg Warner Model 55, A-40, 9-3/4" (248mm), Volvo '73-Up
|