718-402-2400

800-FONE-TRI

TORQUE CONVERTER SHIMS (SPACERS)

Part Category

ACCORDION SPRINGS

BALANCE WEIGHTS

BEARING KITS

BEARING RACES & RETAINERS

BEARINGS

BUSHINGS

CLUTCH PLATES

DIAPHRAGM SPRINGS

HUB CAPS™ & STUD CAPS™

IMPELLER HUBS

INNER STATOR RACES

LININGS (FRICTION RINGS,WAFERS)

METAL-CLAD RADIAL-LIP OIL SEALS

MOUNTING PADS

O-RINGS

OUTER STATOR RACES (CAMS)

PILOTS

PUMP DRIVE INSERTS

RING GEARS

RIVETS

ROLLERS (ROLLS)

SALVAGE RINGS™ (RENEWAL RINGS)

SEAL RINGS

SHIMS (SPACERS)

SPRAGS

STATOR WASHERS (CAPS)

STATORS

THRUST WASHERS

TURBINE HUBS

TURBINE-SPACERS

WAVE SPRINGS

Makes

Aisin-Warner

Allison

Borg Warner

Chrysler

Ford

General Motors

High Performance

Honda / Acura

Industrial

Jatco, Nissan & Other Japanese

Kia

Mazda

Mercedes

Miscellaneous/General Purpose

Mitsubishi

Renault, Peugeot

Saab

Subaru

Toyota

Volkswagen / Audi

ZF

Unit

No Records Found

TORQUE CONVERTER SHIMS (SPACERS)

Part_ID description Specifications Application

PART#: D-10-1
description
Shim
Specifications
  • Use Under D-10 To Adjust Clearance Of D-9 Housing If Unit Has Been Opened Previously
Application
  • Chrysler  Fluid Drive (Antique)

PART#: D-24
description
Shim,.010" Selective, Special
Specifications
Application
  • Chrysler  Fluid Drive (Antique)

PART#: FW-2-010
description
Shim
Specifications
  • Outer Dia: 2.36"
  • Inner Dia: 1.482"
  • Thickness: .010"
  • (Replaced by TW-2X10)
Application
  • Borg Warner  11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
  • Borg Warner  Bolted Aluminum, Industrial & Ford Passenger Applications
  • Borg Warner  11" Industrial
  • Ford  A4LD, 4R55E
  • Ford  C-3, 10-1/4"

PART#: FW-2-020
description
Shim
Specifications
  • Outer Dia: 2.36"
  • Inner Dia: 1.482"
  • Thickness: .020"
  • (Replaced by TW-2X)
Application
  • Borg Warner  11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
  • Borg Warner  Bolted Aluminum, Industrial & Ford Passenger Applications
  • Borg Warner  11" Industrial
  • Ford  A4LD, 4R55E
  • Ford  C-3, 10-1/4"

PART#: FW-2-030
description
Shim
Specifications
  • Outer Dia: 2.36"
  • Inner Dia: 1.482"
  • Thickness: .030"
  • (Replaced by TW-2X30)
Application
  • Borg Warner  11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
  • Borg Warner  Bolted Aluminum, Industrial & Ford Passenger Applications
  • Borg Warner  11" Industrial
  • Ford  A4LD, 4R55E
  • Ford  C-3, 10-1/4"

PART#: FW-2-17
description
Shim,.050" Thick, 5R110W
Specifications
Application
  • Ford  4R100 4 Speed, RWD / 4 × 4
  • Ford  5R110W
Torque-Converter Shim,  AOD-E, 4R70W, E4OD
PART#: FW-9-18
Reference Part#: FD-WS-6
description
Shim
Specifications
  • Outer Dia: 2.58"
  • Inner Dia: 2.4"
  • Thickness: .02"
Application
  • Ford  AOD-E, 4R70W
  • Ford  E4OD

PART#: FW-9-21
description
Shim
Specifications
  • Outer Dia: 2.36"
  • Inner Dia: 2.05"
  • Material: Steel
Application
  • Ford  A4LD, 4R55E, Late

PART#: FW-9-22
Reference Part#: FD-WS-23
description
Shim
Specifications
  • Outer Dia: 2.37"
  • Inner Dia: 2.06"
  • Thickness: .051"
  • Material: Steel
Application
  • Ford  A4LD, 4R55E, Late

PART#: FW-9-23
Reference Part#: FD-WS-17
description
Shim
Specifications
  • Outer Dia: 2.59"
  • Inner Dia: 2.41"
  • Thickness: 0.02"
Application
  • Ford  AOD-E, 4R70W
  • Ford  E4OD

PART#: FW-9-24
Reference Part#: FD-WS-18
description
Shim
Specifications
  • Outer Dia: 2"
  • Inner Dia: 1.75"
  • Thickness: 0.02"
Application
  • Ford  CD4E
Torque-Converter Shim, End Play Fluid Coupling (Hydrak) & Torque Converter Parts
PART#: HW-2-10
description
Shim,End Play
Specifications
  • Outer Dia: 2.41"
  • Inner Dia: 1.7"
  • Thickness: .010"
Application
  • Mercedes  Fluid Coupling (Hydrak) & Torque Converter Parts
Torque-Converter Shim,  General Motors
PART#: MW-2-10
Reference Part#: FD-WS-10
description
Shim
Specifications
  • Outer Dia: 2.938"
  • Inner Dia: 1.875"
  • Thickness: .010"
Application
  • General Motors  Powerglide
  • Borg Warner  Bolted Aluminum, Industrial & Ford Passenger Applications
  • Borg Warner  11" Industrial
  • Ford  Cast Iron 3 Speed, FMX, AMC, Borg & Beck
  • Ford  C-5
Torque-Converter Shim,  General Motors
PART#: MW-2-20
Reference Part#: FD-WS-20
description
Shim
Specifications
  • Outer Dia: 2.938"
  • Inner Dia: 1.875"
  • Thickness: 0.02
Application
  • General Motors  Powerglide
  • Borg Warner  Bolted Aluminum, Industrial & Ford Passenger Applications
  • Borg Warner  11" Industrial
  • Ford  Cast Iron 3 Speed, FMX, AMC, Borg & Beck
  • Ford  C-5
Torque-Converter Shim,  General Motors
PART#: MW-2-30
Reference Part#: FD-WS-30
description
Shim
Specifications
  • Outer Dia: 2.938"
  • Inner Dia: 1.875"
  • Thickness: .030"
Application
  • General Motors  Powerglide
  • Borg Warner  Bolted Aluminum, Industrial & Ford Passenger Applications
  • Borg Warner  11" Industrial
  • Ford  Cast Iron 3 Speed, FMX, AMC, Borg & Beck
  • Ford  C-5
Torque-Converter Shim,  General Motors
PART#: MW-2-50
description
Shim
Specifications
  • Outer Dia: 2.938"
  • Inner Dia: 1.875"
  • Thickness: .050
Application
  • General Motors  Powerglide
  • Borg Warner  Bolted Aluminum, Industrial & Ford Passenger Applications
  • Borg Warner  11" Industrial
  • Ford  Cast Iron 3 Speed, FMX, AMC, Borg & Beck
  • Ford  C-5
Torque-Converter Shim,  ZF4HP20
PART#: PX-8-1
description
Shim
Specifications
  • Outer Dia: 4.05"
  • Inner Dia: 3.15"
  • Thickness: 0.008"
  • Material: Steel
Application
  • ZF  ZF4HP20
Torque-Converter Shim, 0.020
PART#: PX-8-1A
description
Shim,0.020"
Specifications
  • Outer Dia: 4.05"
  • Inner Dia: 3.15"
Application
  • ZF  ZF4HP20
Torque-Converter Shim,  298mm Lockup, 250C, 350C, 700-R4, 4L60E
PART#: SW-2-010
description
Shim
Specifications
  • Outer Dia: 2.75"
  • Inner Dia: 1.585"
  • Thickness: .010"
Application
  • General Motors  298mm Lockup, 250C, 350C, 700-R4, 4L60E
Torque-Converter Shim,  298mm Lockup, 250C, 350C, 700-R4, 4L60E
PART#: SW-2-020
Reference Part#: GM-WS-020X
description
Shim
Specifications
  • Outer Dia: 2.75"
  • Inner Dia: 1.585"
  • Thickness: .020"
Application
  • General Motors  298mm Lockup, 250C, 350C, 700-R4, 4L60E
Torque-Converter Shim,  298mm Lockup, 250C, 350C, 700-R4, 4L60E
PART#: SW-2-030
Reference Part#: GM-WS-30
description
Shim
Specifications
  • Outer Dia: 2.75"
  • Inner Dia: 1.585"
  • Thickness: .030"
Application
  • General Motors  298mm Lockup, 250C, 350C, 700-R4, 4L60E
Torque-Converter Shim,  298mm Lockup, 250C, 350C, 700-R4, 4L60E
PART#: SW-2-050
Reference Part#: GM-WS-50
description
Shim
Specifications
  • Outer Dia: 2.75"
  • Inner Dia: 1.585"
  • Thickness: .050"
Application
  • General Motors  298mm Lockup, 250C, 350C, 700-R4, 4L60E
Torque-Converter Shim,  General Motors
PART#: SW-2-110
Reference Part#: GM-WS-1
description
Shim
Specifications
  • Outer Dia: 3.315"
  • Inner Dia: 2.5"
  • Thickness: .010"
Application
  • General Motors  258mm Lockup, 4T65E
  • General Motors  265mm Lockup, 4T60E & 4T80E
  • General Motors  245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
Torque-Converter Shim,  General Motors
PART#: SW-2-120
Reference Part#: GM-WS-2
description
Shim
Specifications
  • Outer Dia: 3.315"
  • Inner Dia: 2.5"
  • Thickness: .020"
Application
  • General Motors  258mm Lockup, 4T65E
  • General Motors  265mm Lockup, 4T60E & 4T80E
  • General Motors  245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
Torque-Converter Shim,  General Motors
PART#: SW-2-130
Reference Part#: GM-WS-3
description
Shim
Specifications
  • Outer Dia: 3.315"
  • Inner Dia: 2.5"
  • Thickness: 0.03"
Application
  • General Motors  258mm Lockup, 4T65E
  • General Motors  265mm Lockup, 4T60E & 4T80E
  • General Motors  245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
Torque-Converter Shim,  General Motors
PART#: SW-2-15
description
Shim
Specifications
  • Outer Dia: 3.315"
  • Inner Dia: 2.5"
  • Thickness: .020"
Application
  • General Motors  258mm Lockup, 4T65E
  • General Motors  265mm Lockup, 4T60E & 4T80E
  • General Motors  245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
Torque-Converter Shim,  Industrial
PART#: SW-2-17
description
Shim
Specifications
  • Outer Dia: 2.95"
  • Inner Dia: 2.4"
  • Thickness: .02"
Application
  • General Motors  298mm Lockup, 250C, 350C, 700-R4, 4L60E
  • General Motors  TH400 3L80, Allison AT540, 310mm
  • Allison  AT540, 310mm, TH400 3L80
  • Industrial  Borg Warner Industrial 310 mm, Lockup & Non-Lockup
  • Chrysler  310mm Lockup, 47RH, 48RE, A-618
Torque-Converter Shim,  Industrial
PART#: SW-2-210
Reference Part#: GM-WS-4
description
Shim
Specifications
  • Outer Dia: 2.95"
  • Inner Dia: 2.40"
  • Thickness: .010"
Application
  • General Motors  298mm Lockup, 250C, 350C, 700-R4, 4L60E
  • General Motors  TH400 3L80, Allison AT540, 310mm
  • Allison  AT540, 310mm, TH400 3L80
  • Industrial  Borg Warner Industrial 310 mm, Lockup & Non-Lockup
  • Chrysler  310mm Lockup, 47RH, 48RE, A-618
Torque-Converter Shim,  Industrial
PART#: SW-2-220
Reference Part#: GM-WS-5
description
Shim
Specifications
  • Outer Dia: 2.95"
  • Inner Dia: 2.40"
  • Thickness: .020"
Application
  • General Motors  298mm Lockup, 250C, 350C, 700-R4, 4L60E
  • General Motors  TH400 3L80, Allison AT540, 310mm
  • Allison  AT540, 310mm, TH400 3L80
  • Industrial  Borg Warner Industrial 310 mm, Lockup & Non-Lockup
  • Chrysler  310mm Lockup, 47RH, 48RE, A-618
Torque-Converter Shim,  Industrial
PART#: SW-2-230
Reference Part#: GM-WS-6
description
Shim
Specifications
  • Outer Dia: 2.95"
  • Inner Dia: 2.40"
  • Thickness: .030"
Application
  • General Motors  298mm Lockup, 250C, 350C, 700-R4, 4L60E
  • General Motors  TH400 3L80, Allison AT540, 310mm
  • Allison  AT540, 310mm, TH400 3L80
  • Industrial  Borg Warner Industrial 310 mm, Lockup & Non-Lockup
  • Chrysler  310mm Lockup, 47RH, 48RE, A-618
Torque-Converter Washer, Steel Miscellaneous/General Purpose
PART#: SW-2-30
Reference Part#: GM-WS-30S
description
Washer,Steel
Specifications
  • Outer Dia: 2.175"
  • Inner Dia: 1.51"
  • Thickness: .030"
  • Hardness: Rc 32-36
Application
  • General Motors  TH200
  • General Motors  TH350 Chevrolet, TH250 (Vega)
  • General Motors  TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
  • General Motors  TH400 3L80, Allison AT540, 310mm
  • Allison  AT540, 310mm, TH400 3L80
Torque-Converter Shim,  310mm Lockup, 4L80E Single Stator and Dual Stator
PART#: SW-2-310
Reference Part#: GM-WS-18
description
Shim
Specifications
  • Outer Dia: 3.725"
  • Inner Dia: 2.75"
  • Thickness: .010"
Application
  • General Motors  310mm Lockup, 4L80E Single Stator and Dual Stator
Torque-Converter Shim,  310mm Lockup, 4L80E Single Stator and Dual Stator
PART#: SW-2-320
Reference Part#: GM-WS-19
description
Shim
Specifications
  • Outer Dia: 3.725"
  • Inner Dia: 2.75"
  • Thickness: .020"
Application
  • General Motors  310mm Lockup, 4L80E Single Stator and Dual Stator
Torque-Converter Shim,  310mm Lockup, 4L80E Single Stator and Dual Stator
PART#: SW-2-330
Reference Part#: GM-WS-20
description
Shim
Specifications
  • Outer Dia: 3.725"
  • Inner Dia: 2.75"
  • Thickness: .030"
Application
  • General Motors  310mm Lockup, 4L80E Single Stator and Dual Stator
Torque-Converter Shim,  General Motors
PART#: SW-2-410
Reference Part#: GM-WS-24
description
Shim
Specifications
  • Outer Dia: 3.44"
  • Inner Dia: 2.59"
  • Thickness: .010"
Application
  • General Motors  300mm Lockup, 4L60E
  • General Motors  310mm Lockup, 4L80E Late (Single Stator)
  • General Motors  280mm LU (4L60-E) VJCX
Torque-Converter Shim,  General Motors
PART#: SW-2-420
Reference Part#: GM-WS-25
description
Shim
Specifications
  • Outer Dia: 3.44"
  • Inner Dia: 2.59"
  • Thickness: .020"
Application
  • General Motors  300mm Lockup, 4L60E
  • General Motors  310mm Lockup, 4L80E Late (Single Stator)
  • General Motors  280mm LU (4L60-E) VJCX
Torque-Converter Shim,  General Motors
PART#: SW-2-430
Reference Part#: GM-WS-26
description
Shim
Specifications
  • Outer Dia: 3.44"
  • Inner Dia: 2.59"
  • Thickness: .030"
Application
  • General Motors  300mm Lockup, 4L60E
  • General Motors  310mm Lockup, 4L80E Late (Single Stator)
  • General Motors  280mm LU (4L60-E) VJCX

PART#: SW-2-44
Reference Part#: GM-WS-43
description
Shim,Support
Specifications
  • Outer Dia: 3.600"
  • Inner Dia: 2.350"
  • Thickness: 0.010"
  • Material: Steel
Application
  • Chrysler  68RFE, 6.7L Cummins Diesel
Torque-Converter Shim, Conversion Spacer General Motors
PART#: SW-2-45
Reference Part#: GMBW-WS-40
description
Shim,Conversion Spacer
Specifications
  • Outer Dia: 3.600"
  • Inner Dia: 2.350"
  • Thickness: 0.039"
Application
  • General Motors  TH350 Buick, Oldsmobile, Pontiac (Includes TH300)
  • General Motors  TH400 3L80, Allison AT540, 310mm
  • Chrysler  68RFE, 6.7L Cummins Diesel
  • Chrysler  310mm Lockup, 47RH, 48RE, A-618
Torque-Converter Shim,  General Motors
PART#: SW-9-11S
description
Shim
Specifications
  • Outer Dia: 1.35"
  • Inner Dia: 1.122"
  • Thickness: .056"
Application
  • General Motors  245mm Lockup, Models: TH125C, TH180C, TH200C, TH440-R4, TH700-R4 (S-10 Only)
Torque-Converter Shim,  ZF
PART#: TW-2-10
Reference Part#: CH-WS-10
description
Shim
Specifications
  • Outer Dia: 2.95"
  • Inner Dia: 2.16"
  • Thickness: .010"
Application
  • Borg Warner  11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
  • Borg Warner  Bolted Aluminum, Industrial & Ford Passenger Applications
  • Borg Warner  11" Industrial
  • Ford  A4LD, 4R55E
  • Ford  C-3, 10-1/4"
Torque-Converter Shim,  Chrysler
PART#: TW-2-110
Reference Part#: CH-WS-7
description
Shim
Specifications
  • Outer Dia: 2.82"
  • Inner Dia: 1.975"
  • Thickness: .010"
Application
  • Chrysler  10-3/4" Lockup, Late, A-500, A-518, RWD
  • Chrysler  10" 254mm Lockup, A-606, FWD
Torque-Converter Shim,  Chrysler
PART#: TW-2-110A
description
Shim
Specifications
  • Outer Dia: 2.82"
  • Inner Dia: 1.975"
Application
  • Chrysler  10-3/4" Lockup, Late, A-500, A-518, RWD
  • Chrysler  10" 254mm Lockup, A-606, FWD
Torque-Converter Shim,  Chrysler
PART#: TW-2-120
Reference Part#: CH-WS-8
description
Shim
Specifications
  • Outer Dia: 2.82"
  • Inner Dia: 1.975"
  • Thickness: 0.02"
Application
  • Chrysler  10-3/4" Lockup, Late, A-500, A-518, RWD
  • Chrysler  10" 254mm Lockup, A-606, FWD

PART#: TW-2-120A
description
Shim
Specifications
  • Outer Dia: 2.82"
  • Inner Dia: 1.975"
Application
  • Chrysler  10-3/4" Lockup, Late, A-500, A-518, RWD
  • Chrysler  10" 254mm Lockup, A-606, FWD
Torque-Converter Shim,  Chrysler
PART#: TW-2-130
Reference Part#: CH-WS-9
description
Shim
Specifications
  • Outer Dia: 2.82"
  • Inner Dia: 1.975"
  • Thickness: .03"
Application
  • Chrysler  10-3/4" Lockup, Late, A-500, A-518, RWD
  • Chrysler  10" 254mm Lockup, A-606, FWD
Torque-Converter Shim,  Chrysler
PART#: TW-2-20
Reference Part#: CH-WS-20
description
Shim
Specifications
  • Outer Dia: 2.95"
  • Inner Dia: 2.16"
  • Thickness: .020"
Application
  • Borg Warner  11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
  • Borg Warner  11" Industrial
  • Chrysler  11-3/4" Non-Lockup, TF-8 A-727, RWD
  • Chrysler  10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
  • Chrysler  9-1/2" Non-Lockup, A-404, FWD
Torque-Converter Shim,  Chrysler
PART#: TW-2-20A
description
Shim
Specifications
  • Outer Dia: 2.95"
  • Inner Dia: 2.16"
Application
  • Borg Warner  11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
  • Borg Warner  11" Industrial
  • Chrysler  11-3/4" Non-Lockup, TF-8 A-727, RWD
  • Chrysler  10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
  • Chrysler  9-1/2" Non-Lockup, A-404, FWD
Torque-Converter Shim,  10
PART#: TW-2-210
Reference Part#: CH-WS-21
description
Shim
Specifications
  • Outer Dia: 2.87"
  • Inner Dia: 2.07"
  • Thickness: .01"
Application
  • Chrysler  10" 41TE & 42LE
Torque-Converter Shim,  10
PART#: TW-2-220
Reference Part#: CH-WS-22
description
Shim
Specifications
  • Outer Dia: 2.87"
  • Inner Dia: 2.07"
  • Thickness: .02"
Application
  • Chrysler  10" 41TE & 42LE
Torque-Converter Shim,  10
PART#: TW-2-230
Reference Part#: CH-WS-23
description
Shim
Specifications
  • Outer Dia: 2.87"
  • Inner Dia: 2.07"
  • Thickness: .03"
Application
  • Chrysler  10" 41TE & 42LE
Torque-Converter Shim,  Chrysler
PART#: TW-2-30
Reference Part#: CH-WS-30
description
Shim
Specifications
  • Outer Dia: 2.95"
  • Inner Dia: 2.16"
  • Thickness: .030"
Application
  • Borg Warner  11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
  • Borg Warner  11" Industrial
  • Chrysler  11-3/4" Non-Lockup, TF-8 A-727, RWD
  • Chrysler  10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
  • Chrysler  9-1/2" Non-Lockup, A-404, FWD
Torque-Converter Shim,  ZF
PART#: TW-2X
Reference Part#: FD3-WS-20
description
Shim
Specifications
  • Outer Dia: 2.87"
  • Inner Dia: 2.15"
  • Thickness: .020"
Application
  • Borg Warner  11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
  • Borg Warner  Bolted Aluminum, Industrial & Ford Passenger Applications
  • Borg Warner  11" Industrial
  • Ford  A4LD, 4R55E
  • Ford  C-3, 10-1/4"
Torque-Converter Shim,  ZF
PART#: TW-2X10
Reference Part#: FD3-WS-10
description
Shim
Specifications
  • Outer Dia: 2.87"
  • Inner Dia: 2.15"
  • Thickness: .010"
Application
  • Borg Warner  11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
  • Borg Warner  Bolted Aluminum, Industrial & Ford Passenger Applications
  • Borg Warner  11" Industrial
  • Ford  A4LD, 4R55E
  • Ford  C-3, 10-1/4"
Torque-Converter Shim,  ZF
PART#: TW-2X30
Reference Part#: FD3-WS-30
description
Shim
Specifications
  • Outer Dia: 2.87"
  • Inner Dia: 2.15"
  • Thickness: .03"
Application
  • Borg Warner  11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
  • Borg Warner  Bolted Aluminum, Industrial & Ford Passenger Applications
  • Borg Warner  11" Industrial
  • Ford  A4LD, 4R55E
  • Ford  C-3, 10-1/4"
Torque-Converter Shim,  ZF
PART#: TW-2X-30
description
Shim
Specifications
  • Outer Dia: 2.87"
  • Inner Dia: 2.15"
Application
  • Borg Warner  11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
  • Borg Warner  Bolted Aluminum, Industrial & Ford Passenger Applications
  • Borg Warner  11" Industrial
  • Ford  A4LD, 4R55E
  • Ford  C-3, 10-1/4"
Torque-Converter Shim,  ZF
PART#: TW-9-010
Reference Part#: CH-WS-16
description
Shim
Specifications
  • Outer Dia: 2.40"
  • Inner Dia: 1.45"
  • Thickness: .010"
Application
  • General Motors  TH200
  • General Motors  254mm, TH125, Non-Lockup
  • Chrysler  10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
  • Chrysler  10-3/4" Lockup, Late, A-500, A-518, RWD
  • ZF  Volkswagen Stick Auto (Antique)
Torque-Converter Shim,  ZF
PART#: TW-9-020
Reference Part#: CH-WS-17
description
Shim
Specifications
  • Outer Dia: 2.40"
  • Inner Dia: 1.45"
  • Thickness: .020"
Application
  • General Motors  TH200
  • General Motors  254mm, TH125, Non-Lockup
  • Chrysler  10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
  • Chrysler  10-3/4" Lockup, Late, A-500, A-518, RWD
  • ZF  Volkswagen Stick Auto (Antique)
Torque-Converter Shim,  ZF
PART#: TW-9-030
Reference Part#: CH-WS-18
description
Shim
Specifications
  • Outer Dia: 2.40"
  • Inner Dia: 1.45"
  • Thickness: .030"
Application
  • General Motors  TH200
  • General Motors  254mm, TH125, Non-Lockup
  • Chrysler  10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
  • Chrysler  10-3/4" Lockup, Late, A-500, A-518, RWD
  • ZF  Volkswagen Stick Auto (Antique)
Torque-Converter Shim,  10
PART#: TW-9-14
description
Shim
Specifications
  • Outer Dia: 2.000"
  • Inner Dia: 1.075"
  • Thickness: .020"
Application
  • Chrysler  10" 254mm Lockup, A-606, FWD

PART#: TW-9-9
description
Shim
Specifications
  • Outer Dia: 2.4"
  • Inner Dia: 1.45"
  • Thickness: 0.012"
Application
  • General Motors  TH200
  • General Motors  254mm, TH125, Non-Lockup
  • Chrysler  10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
  • Chrysler  10-3/4" Lockup, Late, A-500, A-518, RWD
  • ZF  Volkswagen Stick Auto (Antique)
Torque-Converter Shim,  ZF
PART#: VW-2-10
Reference Part#: FS-WS-10
description
Shim
Specifications
  • Outer Dia: 2.5"
  • Inner Dia: 1.575"
  • Thickness: 0.010"
  • Material: Steel
Application
  • Volkswagen / Audi  VW 010
  • Borg Warner  9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
  • ZF  ZF4HP22 & Chrysler Jeep A999
  • ZF  BMW (BABY, 318) 254mm, BM-12
  • ZF  ZF4HP18
Torque-Converter Shim,  ZF
PART#: VW-2-20
Reference Part#: FS-WS-20
description
Shim
Specifications
  • Outer Dia: 2.500"
  • Inner Dia: 1.575"
  • Thickness: 0.020"
  • Material: Steel
Application
  • Volkswagen / Audi  VW 010
  • Borg Warner  9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
  • ZF  ZF4HP22 & Chrysler Jeep A999
  • ZF  BMW (BABY, 318) 254mm, BM-12
  • ZF  ZF4HP18
Torque-Converter Shim,  ZF
PART#: VW-2-30
Reference Part#: FS-WS-30
description
Shim
Specifications
  • Outer Dia: 2.5"
  • Inner Dia: 1.564"
  • Thickness: 0.03"
Application
  • Volkswagen / Audi  VW 010
  • Borg Warner  9-1/2" Models 35, 45 & 55, U. K. (Also Various Industrial)
  • ZF  ZF4HP22 & Chrysler Jeep A999
  • ZF  BMW (BABY, 318) 254mm, BM-12
  • ZF  ZF4HP18

PART#: VW-9-2
Reference Part#: VW-WS-20
description
Shim
Specifications
  • Outer Dia: 2.38"
  • Inner Dia: 1.35"
  • Thickness: .010"
Application
  • General Motors  TH200
  • General Motors  254mm, TH125, Non-Lockup
  • Chrysler  10-3/4" Lockup, Early, TF-6 A-904 & TF-8 A-727, RWD
  • Chrysler  10-3/4" Lockup, Late, A-500, A-518, RWD
  • ZF  Volkswagen Stick Auto (Antique)
Torque-Converter Shim,  General Motors
PART#: WW-9-1
Reference Part#: BW-WS-12
description
Shim
Specifications
  • Outer Dia: 1.91"
  • Inner Dia: 1.45"
  • Thickness: .010"
Application
  • General Motors  310mm Lockup, 4L80E Single Stator and Dual Stator
  • Borg Warner  11" Models 35, 01 &10, Rambler, Studebaker, Checker Cab, Willys, Jeep, International
  • Borg Warner  11" Industrial
  • Borg Warner  D.G. With Direct Drive Clutch 11" (279mm Dia.)
  • Borg Warner  D.G. With Direct Drive Clutch 12" (305mm Dia.) (Not For Export)
Torque-Converter Shim,  Borg Warner
PART#: WW-9-5
description
Shim
Specifications
  • Outer Dia: 2.72"
  • Inner Dia: 2"
  • Thickness: .03"
  • For O.E. Washers
Application
  • Borg Warner  11" Except U.S.A.,Type 1, Models 8, 12 & 35, 65, Early Jaguar