Part Search

Torque Converter | Borg Warner | BorgWarner BW/Chrysler 310mm NLU

Ill.# Image Description Specification Part #
1 Hubcap Fits 1-7/8" (47.6mm). Length: 1"
  • Color: Yellow
 MHC-YB
Hubcap MHC-YB
Fits 1-7/8" (47.6mm). Length: 1" &
  • Color: Yellow
1 Hubcap Fits 1-7/8" (47.6mm). Length: 1-3/4"
  • Color: Yellow
  • Fits 1-7/8" (47.6mm)
 MHC-Y
Hubcap MHC-Y
Fits 1-7/8" (47.6mm). Length: 1-3/4" &
  • Color: Yellow
  • Fits 1-7/8" (47.6mm)
2 Impeller Hub
  • Hardness: Rc 32-36
  • Inside Dia: 4.15"
 SH-1-14GRCMA
Impeller Hub SH-1-14GRCMA
&
  • Hardness: Rc 32-36
  • Inside Dia: 4.15"
2 Impeller Hub Only 47RH & 47RE
  • Journal Dia: 1.874"
  • Installed Height: 1.950"
  • Height: 2.25
  • Hub Mount: Flanged
  • Pump Drive Type: Slots
  • Flange Dia: 4.15"
  • Hardness: Rc 32-36
  • Inside Dia: 4.15"
 SH-1-23GRC
Impeller Hub SH-1-23GRC
& Only 47RH & 47RE
  • Journal Dia: 1.874"
  • Installed Height: 1.950"
  • Height: 2.25
  • Hub Mount: Flanged
  • Pump Drive Type: Slots
  • Flange Dia: 4.15"
  • Hardness: Rc 32-36
  • Inside Dia: 4.15"
2 Impeller Hub Flanged
  • Journal Dia: 1.874"
  • Installed Height: 2.28"
  • Hub Mount: Flanged
  • Pump Drive Type: Slots
  • Hardness: Rc 32-36
  • Inside Dia: 4.15"
 SH-1-14GRCM
Impeller Hub SH-1-14GRCM
Flanged &
  • Journal Dia: 1.874"
  • Installed Height: 2.28"
  • Hub Mount: Flanged
  • Pump Drive Type: Slots
  • Hardness: Rc 32-36
  • Inside Dia: 4.15"
2 Impeller Hub
  • Journal Dia: 1.874"
  • Installed Height: 2.060"
  • Height: 2.281
  • Hub Mount: Flanged
  • Pump Drive Type: Slots
  • Flange Dia: 4.120"
  • Hardness: Rc 60-62
  • Inside Dia: 4.15"
  • Use Bearing SW-2-14, AT-540
 SH-1-14GRC
Impeller Hub SH-1-14GRC
&
  • Journal Dia: 1.874"
  • Installed Height: 2.060"
  • Height: 2.281
  • Hub Mount: Flanged
  • Pump Drive Type: Slots
  • Flange Dia: 4.120"
  • Hardness: Rc 60-62
  • Inside Dia: 4.15"
  • Use Bearing SW-2-14, AT-540
2 Impeller Hub O.E. Replacement
  • Journal Dia: 1.874"
  • Installed Height: 2.070"
  • Height: 2.281
  • Hub Mount: Flanged
  • Pump Drive Type: Slots
  • Flange Dia: 4.120"
  • Hardness: Rc 32-36
  • Inside Dia: 4.15"
 SH-1-10GRC
Impeller Hub SH-1-10GRC
O.E. Replacement &
  • Journal Dia: 1.874"
  • Installed Height: 2.070"
  • Height: 2.281
  • Hub Mount: Flanged
  • Pump Drive Type: Slots
  • Flange Dia: 4.120"
  • Hardness: Rc 32-36
  • Inside Dia: 4.15"
2 Impeller Hub
  • Journal Dia: 1.874"
  • Installed Height: 2.280"
  • Hub Mount: Flanged
  • Pump Drive Type: Slots
  • Inside Dia: 4.15"
 SH-1-14G
Impeller Hub SH-1-14G
&
  • Journal Dia: 1.874"
  • Installed Height: 2.280"
  • Hub Mount: Flanged
  • Pump Drive Type: Slots
  • Inside Dia: 4.15"
3 Misc NPN-SPL
Misc NPN-SPL
&
4 Bearing
  • Thickness: 0.255
  • Thickness metric: 6.48
  • Bearing type: Enclosed
  • Outside Dia: 3.28
  • Inside Dia: 2.388
  • Outside Dia Metric: 83.31
  • Inside Dia metric: 60.66
 SW-2-12
Bearing SW-2-12
&
  • Thickness: 0.255
  • Thickness metric: 6.48
  • Bearing type: Enclosed
  • Outside Dia: 3.28
  • Inside Dia: 2.388
  • Outside Dia Metric: 83.31
  • Inside Dia metric: 60.66
4 Bearing Timken
  • Thickness: 0.25"
  • Bearing type: Enclosed
  • Outside Dia: 3.28"
  • Inside Dia: 2.39"
 SW-2-12T
Bearing SW-2-12T
Timken &
  • Thickness: 0.25"
  • Bearing type: Enclosed
  • Outside Dia: 3.28"
  • Inside Dia: 2.39"
5 Shim
  • Thickness: .02"
  • Outside Dia: 2.95"
  • Inside Dia: 2.4"
 SW-2-17
Shim SW-2-17
&
  • Thickness: .02"
  • Outside Dia: 2.95"
  • Inside Dia: 2.4"
5 Shim
  • Thickness: .010"
  • Outside Dia: 2.95"
  • Inside Dia: 2.40"
 SW-2-210
Shim SW-2-210
&
  • Thickness: .010"
  • Outside Dia: 2.95"
  • Inside Dia: 2.40"
5 Shim
  • Thickness: .020"
  • Outside Dia: 2.95"
  • Inside Dia: 2.40"
 SW-2-220
Shim SW-2-220
&
  • Thickness: .020"
  • Outside Dia: 2.95"
  • Inside Dia: 2.40"
5 Washer Hub Bearing Adapter
  • Outside Dia: 2.95"
  • Inside Dia: 2.4"
  • Use With SH-1-26GRC to Accept SW-2-14 Bearing
 SW-2-23
Washer SW-2-23
Hub Bearing Adapter &
  • Outside Dia: 2.95"
  • Inside Dia: 2.4"
  • Use With SH-1-26GRC to Accept SW-2-14 Bearing
5 Shim
  • Thickness: .030"
  • Outside Dia: 2.95"
  • Inside Dia: 2.40"
 SW-2-230
Shim SW-2-230
&
  • Thickness: .030"
  • Outside Dia: 2.95"
  • Inside Dia: 2.40"
6 Stator Low stall
  • Material: Aluminum
 SX-5-11
Stator SX-5-11
Low stall &
  • Material: Aluminum
7 Shim Support
  • Thickness: 0.010"
  • Material: Steel
  • Outside Dia: 3.600"
  • Inside Dia: 2.350"
 SW-2-44
Shim SW-2-44
Support &
  • Thickness: 0.010"
  • Material: Steel
  • Outside Dia: 3.600"
  • Inside Dia: 2.350"
7 Spring Retainer Stator
  • Height: 0.530"
  • Dimensions: 3.120" x 3.120"
  • Material: Steel
  • For .575" Long Rollers
 SX-15B
Spring Retainer SX-15B
Stator &
  • Height: 0.530"
  • Dimensions: 3.120" x 3.120"
  • Material: Steel
  • For .575" Long Rollers
9 Accordion Spring 10 Pieces Required.
  • Width: 0.56"
  • Relaxed Length: 0.438"
  • Folds: 3
  • Material: Steel
  • Relaxed Height: 0.22"
 SS-6
Accordion Spring SS-6
& 10 Pieces Required.
  • Width: 0.56"
  • Relaxed Length: 0.438"
  • Folds: 3
  • Material: Steel
  • Relaxed Height: 0.22"
9 Accordion Spring 10 Pieces Required.
  • Width: 0.56"
  • Relaxed Length: 0.43"
  • Folds: 5
  • Relaxed Height: 0.24"
 SS-6-6
Accordion Spring SS-6-6
& 10 Pieces Required.
  • Width: 0.56"
  • Relaxed Length: 0.43"
  • Folds: 5
  • Relaxed Height: 0.24"
10 Roller 10 Pieces Required.
  • Dia: 0.312"
  • Length: 0.572"
  • Material: Steel
 SR-7
Roller SR-7
& 10 Pieces Required.
  • Dia: 0.312"
  • Length: 0.572"
  • Material: Steel
11 Inner Race Stator
  • Height: 1.040"
  • External Teeth: 27
  • Outside Dia: 2.156"
 SX-14
Inner Race SX-14
Stator &
  • Height: 1.040"
  • External Teeth: 27
  • Outside Dia: 2.156"
11 Inner Race Stator TX-14-3
Inner Race TX-14-3
Stator &
12 Stator Cap 5 Lugs
  • Thickness: 1.05"
  • Material: Phenolic
  • Outside Dia: 3.86"
  • Inside Dia: 1.72"
  • Shorter than SW-4-5. Casting#: 8624734.
 SW-4-2
Stator Cap SW-4-2
5 Lugs &
  • Thickness: 1.05"
  • Material: Phenolic
  • Outside Dia: 3.86"
  • Inside Dia: 1.72"
  • Shorter than SW-4-5. Casting#: 8624734.
12 Stator Cap With Ribs, Solid, 5 Lugs (AT540)
  • Thickness: 1.06"
  • Material: Phenolic
  • Outside Dia: 3.745"
  • Inside Dia: 1.690"
 SW-4-28
Stator Cap SW-4-28
With Ribs, Solid, 5 Lugs (AT540) &
  • Thickness: 1.06"
  • Material: Phenolic
  • Outside Dia: 3.745"
  • Inside Dia: 1.690"
12 Stator Cap
  • Thickness: 1.050"
  • Material: Aluminum
  • Outside Dia: 3.72"
  • Inside Dia: 1.72"
  • 8623015, 25210078
 SW-4-2A
Stator Cap SW-4-2A
&
  • Thickness: 1.050"
  • Material: Aluminum
  • Outside Dia: 3.72"
  • Inside Dia: 1.72"
  • 8623015, 25210078
12 Stator Cap With Ribs, No Lugs
  • Thickness: 1.05"
  • Material: Phenolic
  • Outside Dia: 3.75"
  • Inside Dia: 1.72"
  • Casting#: 8626167
 SW-4-2B
Stator Cap SW-4-2B
With Ribs, No Lugs &
  • Thickness: 1.05"
  • Material: Phenolic
  • Outside Dia: 3.75"
  • Inside Dia: 1.72"
  • Casting#: 8626167
12 Stator Cap With Ribs and 5 Lugs
  • Thickness: 1.055"
  • Material: Phenolic
  • Outside Dia: 3.75"
  • Inside Dia: 1.70"
 SW-4-2C
Stator Cap SW-4-2C
With Ribs and 5 Lugs &
  • Thickness: 1.055"
  • Material: Phenolic
  • Outside Dia: 3.75"
  • Inside Dia: 1.70"
12 Washer Kit Contains: SW-4-17 and SW-2-12
  • Outside Dia: 3.86"
  • Inside Dia: 1.72"
 SW-4-2K
Washer Kit SW-4-2K
Contains: SW-4-17 and SW-2-12 &
  • Outside Dia: 3.86"
  • Inside Dia: 1.72"
12 Stator Cap Bearing Adapter
  • Thickness: 1.031"
  • Material: Aluminum
  • Outside Dia: 3.74"
  • Inside Dia: 1.690"
  • Use with SW-2-12 bearing
 SW-4-34
Stator Cap SW-4-34
Bearing Adapter &
  • Thickness: 1.031"
  • Material: Aluminum
  • Outside Dia: 3.74"
  • Inside Dia: 1.690"
  • Use with SW-2-12 bearing
13 Rivet 10 Pieces Required.
  • Length: 0.438"
  • Rivet solid or tubular: Solid
  • Rivet Shank Dia: 0.218"
  • Rivet Head Dia: 0.438"
  • Rivet Head: Flat
 SX-12-17
Rivet SX-12-17
& 10 Pieces Required.
  • Length: 0.438"
  • Rivet solid or tubular: Solid
  • Rivet Shank Dia: 0.218"
  • Rivet Head Dia: 0.438"
  • Rivet Head: Flat
14 Turbine Hub
  • Height: 1.700"
  • Internal Teeth: 24
  • Outside Dia: 4.25"
 SX-13-11
Turbine Hub SX-13-11
&
  • Height: 1.700"
  • Internal Teeth: 24
  • Outside Dia: 4.25"
14 Turbine Hub
  • Internal Teeth: 24
  • Hardness: Heat-Treated (hardened)
  • Outside Dia: 4.25"
 SX-13-11HT
Turbine Hub SX-13-11HT
&
  • Internal Teeth: 24
  • Hardness: Heat-Treated (hardened)
  • Outside Dia: 4.25"
16 Turbine Washer O.E. Replacement
  • Thickness: .06"
  • Material: Vespel®
  • Outside Dia: 2.190"
  • Inside Dia: 1.400"
 SW-9-16
Turbine Washer SW-9-16
& O.E. Replacement
  • Thickness: .06"
  • Material: Vespel®
  • Outside Dia: 2.190"
  • Inside Dia: 1.400"
16 Turbine Washer
  • Thickness: .08"
  • Material: Bronze
  • Outside Dia: 2.190"
  • Inside Dia: 1.400"
 SW-9-16B
Turbine Washer SW-9-16B
&
  • Thickness: .08"
  • Material: Bronze
  • Outside Dia: 2.190"
  • Inside Dia: 1.400"
17 Bushing Cover
  • Thickness: 0.475"
  • Housing Bore Dia: 1.5"
  • Shaft Dia: 1.365"
  • Material: Bi-metal
  • Type: Precision
 SB-18-3
Bushing SB-18-3
Cover &
  • Thickness: 0.475"
  • Housing Bore Dia: 1.5"
  • Shaft Dia: 1.365"
  • Material: Bi-metal
  • Type: Precision